...
- User_Profile1
- User_Profile2
Pre-configured profiles are designed to give users a fast start with the allocation and consider the user’s needs. Three profiles are required to grant the user the desired range of options:
...
The first pair of solutions are created by 22.Single Recut and 22.SmartRecut using the High_Performance profile. Note the Optical performance of these solutions.
The second pair of solutions uses the Commercial profile and the third pair uses the Max_Mass profile. Max_Mass solutions have lower optical performance and Symmetry, but higher yield.
...
For example, in GoodwinGoldStars template, "1C1P" means that the Cut must have one (Gold) Star on the crown and pavilion. In GoodwinStars2C2P template, "2C2P" means that the Cut must have both Stars (Gold and Silver) on the crown and pavilion.
The following cases are possible:
...
It means you can "Open Facet Types to adjust", call the context menu and set the Stars on the desired facet groups.
Then click Apply, close the Facet Types window and register your Cut.
...
Case 2. The message "Failed to set the Stars automatically. Please set them manually in Facet Types with the context menu" will appear.
In this case, you must open the Facet Types window and manually set the stars on the desired facets groups through the context menu.
...
| Note |
|---|
Important! Once you have created cut with the Stars, they cannot be removed or rearranged. All preforms, optimization solutions, and SmartNormalize solutions derived from them will inherit the stars from the first master preform.
|
Reporting
The slope angles are the same in the appraiser
...
and in the i3D mini reports:
And Cutwise gets the same values.
Change Cut: algorithm of manual allocation (Tools)
...