...
This is sample of boundaries which use likes to apply applying as additional limitation to GIA Facetware:
...
These 2 parts are editable inside file MyGIA.txt placed in folder Facetware in root folder of program.Let's start edit boundaries:
Step-by-step guide
...
1. How to change interval for existed in appraiser parameter.
For example, user needs to change interval for Crown Angle for VG group to 30...36. It is necessary to
Open MyGIA.txt in Notepad and find apprising part GIA Facetware.M4:
Info icon false [Appraiser]
Version: 7
Title: "GIA Facetware.M4"
SerialNumber: 320[quality]
EX 10 RGB 0 255 0
VG 20 RGB 255 0 255
GD 30 RGB 255 255 0
FR 40 RGB 255 0 0
[end][other]
UnknownQuality: Poor 60 RGB 255 255 255value : t : DC_TableDiameter : stack : Ref1
value : b : DC_CrownAngle : stack : Ref1
value : a : DC_PavilionAngle : stack : Ref1
value : star : DC_StarFacets : stack : Ref1
value : lower : DC_LowerGirdleFacetLength : stack : Ref1
value : gi : DC_GirdleThickness : stack : Ref1
value : hc : DC_CrownHeight : stack : Ref1
value : h : DC_GirdleThicknessValue : stack : Ref1
value : cu : DC_Culet : stack : Ref1
value : acp : : stack : 0
value : app : : stack : 0
value : sum_ap : : stack : 0interval : Restriction_Table : t : : : EX 55 58 VG 10 99 GD 10 99 FR 10 99 : (%) : "Intervals for Table"
interval : Restriction_CrownAngle : b : : : EX 33 35 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Crown Angle"
interval : Restriction_PavilionAngle : a : : : EX 40.6 41.0 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Pavilion Angle"
interval : Restriction_Star : star : : : EX 45 50 VG 10 90 GD 10 90 FR 10 90 : (%) : "Intervals for Star / upper ratio"
interval : Restriction_LowerLength : lower : : : EX 75 80 VG 50 99 GD 50 99 FR 50 99 : (%) : "Intervals for Lower length"
interval : Restriction_GirdleBezel : gi : : : EX 2.8 3.8 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for gidle thickness (bezel)"
interval : Restriction_CrownHeight : hc : : : EX 12.7 14.0 VG 5 40 GD 5 40 FR 5 40 : (%) : "Intervals for Crown Height"
interval : Restriction_GirdleValue : h : : : EX 0.75 2.04 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for gidle thickness (value)"
interval : Restriction_Culet : cu : : : EX 0 0.5 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for Culet"
interval : Restriction_ACP : acp : : : EX -2.5 2.5 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for ACP"
interval : Restriction_APP : app : : : EX -2.5 2.5 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for ASP"
interval : Restriction_Sum_ACP_APP : sum_ap : : : EX -3.0 3.0 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for Sum ACP APP"grading : Restrictions : Restriction_Table Restriction_CrownAngle Restriction_PavilionAngle Restriction_Star Restriction_LowerLength Restriction_GirdleBezel Restriction_CrownHeight Restriction_GirdleValue Restriction_Culet : Bad :
grading : Painting : Restriction_ACP Restriction_APP Restriction_Sum_ACP_APP : Bad :reserved : Calculator : "=InitData(GIA Adaptor)" : "DataValues(t,tavg,b,bavg,a,aavg,acp,paint_upp,app,paint_low,sum_ap,paint_sum)" : "Calculate parameters in GIA Adaptor appraiser"
externalgrading : Adaptor : "GIA Adaptor" Recommended : : : : :
grading : Main : Adaptor Calculator Restrictions Painting : Bad : Final[end]
[end]
Find section with "intervals" - it contains intervals for different parameters for different cut quality groups. Here user can edit intervals for EX, VG and other cut quality groups.
Edit string:
Before:
Info icon false interval : Restriction_CrownAngle : b : : : EX 33 35 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Crown Angle" After:
Info icon false interval : Restriction_CrownAngle : b : : : EX 33 35 VG 30 36 GD 10 90 FR 10 90 : (°) : "Intervals for Crown Angle"
Find optimization part My GIA 4:
Info icon false [Appraiser]
Version: 7
Title: "My GIA 4"
SerialNumber: 316[quality]
EX 10 RGB 0 255 0
VG 20 RGB 255 0 255
GD 30 RGB 255 255 0
FR 40 RGB 255 0 0
[end][other]
UnknownQuality: Poor 60 RGB 255 255 255
AssociatedAppraiser: "GIA Facetware.M4"externalgrading : Adaptor : "GIA Adaptor" RecommendedGrading : : : : :
grading : Main : Adaptor : Bad : Final[end]
[cut]
Name: Brilliant
Quality: EX VG GD FRDiamondStart: /file My4\Brilliant_Start.dmc
Parameters: DC_TableDiameter (%) DC_CrownAngle_Table (°) DC_PavilionAngle (°) DC_StarFacets (%) DC_LowerGirdleFacetLength (%) DC_GirdleThickness (%) DC_Culet (%) \
DC_CuletX (%) DC_CuletY (%) DC_GirdleRatio DC_GirdleDeviation (%)Optimize: \ DC_TableDiameter DC_TableDiameter DC_TableDiameter_CrownAngleStarFacet_Fixed \
DC_GirdleThicknessValue DC_GirdleThickness DC_GirdleThickness \
DC_CrownAngle_Table DC_CrownAngle_Table DC_CrownAngle_Table \
DC_PavilionAngle DC_PavilionAngle DC_PavilionAngle \
DC_CrownAngleLevel1 DC_CrownAngle_Table DC_CrownAngle \
OP_1 DC_StarFacets DC_StarFacets \
OP_2 DC_LowerGirdleFacetLength DC_LowerGirdleFacetLength \
OP_3 DC_CuletY DC_CuletY \
OP_4 DC_GirdleDeviation DC_GirdleDeviation \Mass: 0.00 100000 \
55.05 57.95 33.05 34.95 40.65 40.95 45.10 49.90 75 80 2.8 3.8 0 0.5 -0.6 0.6 -0.6 0.6 0.991 1.009 -0.9 0.9 \
44 72 20 41.5 37.2 44 45 55 60 95 0 7 0 3.74 -1.2 1.2 -1.2 1.2 0.982 1.018 -1.8 1.8 \
44 72 20 41.5 37.2 44 45 55 60 95 0 8 0 8.74 -2.4 2.4 -2.4 2.4 0.964 1.036 -3.6 3.6 \
44 72 20 41.5 37.2 44 45 55 60 95 0 11 0 13.75 -4.8 4.8 -4.8 4.8 0.928 1.072 -7.2 7.2 \[end]
[fixedcut]
Name: Brilliant
DMCFiles: EX SetDiamond1 My4\Set1_Brilliant_EX.dmcx
DMCFiles: EX SetDiamond2 My4\Set2_Brilliant_EX.dmcx
[end][end]
- Find parameter DC_CrownAngle_Table - it is Crown Angle. In section Mass: and following table there are optimizartion intervals for parameters mentioned in Parameters: section. Each string corresponds to each cut quality group. All groupd are metnions in Quality: section.
- So we find second string for VG group and change 3rd and 4th values (they are correspond to Crown angle range) to 29.95 and 36.05 (we have to make 0.05 gap for optimization values in comparison with apprising values - it helps find better solutions during optimization):
Before:
Info icon false Mass: 0.00 100000 \
55.05 57.95 33.05 34.95 40.65 40.95 45.10 49.90 75 80 2.8 3.8 0 0.5 -0.6 0.6 -0.6 0.6 0.991 1.009 -0.9 0.9 \
44 72 20 41.5 37.2 44 45 55 60 95 0 7 0 3.74 -1.2 1.2 -1.2 1.2 0.982 1.018 -1.8 1.8 \After:
Info icon false Mass: 0.00 100000 \
55.05 57.95 33.05 34.95 40.65 40.95 45.10 49.90 75 80 2.8 3.8 0 0.5 -0.6 0.6 -0.6 0.6 0.991 1.009 -0.9 0.9 \
44 72 29.95 36.05 37.2 44 45 55 60 95 0 7 0 3.74 -1.2 1.2 -1.2 1.2 0.982 1.018 -1.8 1.8 \
2. How to add parameter and its interval to appraiser.
For example, user needs to add Total Heigth parameter with range 58...62.5 to EX group
...
. It is necessary to
Open MyGIA.txt in Notepad and find apprising part GIA Facetware.M4:
Info icon false [Appraiser]
Version: 7
Title: "GIA Facetware.M4"
SerialNumber: 320[quality]
EX 10 RGB 0 255 0
VG 20 RGB 255 0 255
GD 30 RGB 255 255 0
FR 40 RGB 255 0 0
[end][other]
UnknownQuality: Poor 60 RGB 255 255 255value : t : DC_TableDiameter : stack : Ref1
value : b : DC_CrownAngle : stack : Ref1
value : a : DC_PavilionAngle : stack : Ref1
value : star : DC_StarFacets : stack : Ref1
value : lower : DC_LowerGirdleFacetLength : stack : Ref1
value : gi : DC_GirdleThickness : stack : Ref1
value : hc : DC_CrownHeight : stack : Ref1
value : h : DC_GirdleThicknessValue : stack : Ref1
value : cu : DC_Culet : stack : Ref1
value : acp : : stack : 0
value : app : : stack : 0
value : sum_ap : : stack : 0interval : Restriction_Table : t : : : EX 55 58 VG 10 99 GD 10 99 FR 10 99 : (%) : "Intervals for Table"
interval : Restriction_CrownAngle : b : : : EX 33 35 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Crown Angle"
interval : Restriction_PavilionAngle : a : : : EX 40.6 41.0 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Pavilion Angle"
interval : Restriction_Star : star : : : EX 45 50 VG 10 90 GD 10 90 FR 10 90 : (%) : "Intervals for Star / upper ratio"
interval : Restriction_LowerLength : lower : : : EX 75 80 VG 50 99 GD 50 99 FR 50 99 : (%) : "Intervals for Lower length"
interval : Restriction_GirdleBezel : gi : : : EX 2.8 3.8 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for gidle thickness (bezel)"
interval : Restriction_CrownHeight : hc : : : EX 12.7 14.0 VG 5 40 GD 5 40 FR 5 40 : (%) : "Intervals for Crown Height"
interval : Restriction_GirdleValue : h : : : EX 0.75 2.04 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for gidle thickness (value)"
interval : Restriction_Culet : cu : : : EX 0 0.5 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for Culet"
interval : Restriction_ACP : acp : : : EX -2.5 2.5 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for ACP"
interval : Restriction_APP : app : : : EX -2.5 2.5 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for ASP"
interval : Restriction_Sum_ACP_APP : sum_ap : : : EX -3.0 3.0 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for Sum ACP APP"grading : Restrictions : Restriction_Table Restriction_CrownAngle Restriction_PavilionAngle Restriction_Star Restriction_LowerLength Restriction_GirdleBezel Restriction_CrownHeight Restriction_GirdleValue Restriction_Culet : Bad :
grading : Painting : Restriction_ACP Restriction_APP Restriction_Sum_ACP_APP : Bad :reserved : Calculator : "=InitData(GIA Adaptor)" : "DataValues(t,tavg,b,bavg,a,aavg,acp,paint_upp,app,paint_low,sum_ap,paint_sum)" : "Calculate parameters in GIA Adaptor appraiser"
externalgrading : Adaptor : "GIA Adaptor" Recommended : : : : :
grading : Main : Adaptor Calculator Restrictions Painting : Bad : Final[end]
[end]
Find section with "value" and add parameter DC_TotalHeight:
Info icon false value : t : DC_TableDiameter : stack : Ref1
value : td : DC_TotalHeight : stack : Ref1
value : b : DC_CrownAngle : stack : Ref1
value : a : DC_PavilionAngle : stack : Ref1
value : star : DC_StarFacets : stack : Ref1
value : lower : DC_LowerGirdleFacetLength : stack : Ref1
value : gi : DC_GirdleThickness : stack : Ref1
value : hc : DC_CrownHeight : stack : Ref1
value : h : DC_GirdleThicknessValue : stack : Ref1
value : cu : DC_Culet : stack : Ref1
value : acp : : stack : 0
value : app : : stack : 0
value : sum_ap : : stack : 0Find section with "intervals" and add interval for EX group 58...62.5 like this:
Info icon false interval : Restriction_Table : t : : : EX 55 58 VG 10 99 GD 10 99 FR 10 99 : (%) : "Intervals for Table"
interval : Restriction_TotalHeight : td : : : EX 58 62.5 VG 10 99 GD 10 90 FR 10 90 : (%) : "Intervals for Total height"
interval : Restriction_CrownAngle : b : : : EX 33 35 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Crown Angle"
interval : Restriction_PavilionAngle : a : : : EX 40.6 41.0 VG 10 90 GD 10 90 FR 10 90 : (°) : "Intervals for Pavilion Angle"
interval : Restriction_Star : star : : : EX 45 50 VG 10 90 GD 10 90 FR 10 90 : (%) : "Intervals for Star / upper ratio"
interval : Restriction_LowerLength : lower : : : EX 75 80 VG 50 99 GD 50 99 FR 50 99 : (%) : "Intervals for Lower length"
interval : Restriction_GirdleBezel : gi : : : EX 2.8 3.8 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for gidle thickness (bezel)"
interval : Restriction_CrownHeight : hc : : : EX 12.7 14.0 VG 5 40 GD 5 40 FR 5 40 : (%) : "Intervals for Crown Height"
interval : Restriction_GirdleValue : h : : : EX 0.75 2.04 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for gidle thickness (value)"
interval : Restriction_Culet : cu : : : EX 0 0.5 VG 0 20 GD 0 20 FR 0 20 : (%) : "Intervals for Culet"
interval : Restriction_ACP : acp : : : EX -2.5 2.5 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for ACP"
interval : Restriction_APP : app : : : EX -2.5 2.5 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for ASP"
interval : Restriction_Sum_ACP_APP : sum_ap : : : EX -3.0 3.0 VG -9 20 GD -9 20 FR -9 20 : (°) : "Intervals for Sum ACP APP"There is no need to add parameter TotalHeight in optimization part My GIA 4 because there are other parameters which form total height of stone and they are optimized.
Related articles
Content by Label | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
hidden | true |
---|
...