...
To place the stone, you need to open the lighting cover and set the stone on the holder connected to the vacuum pump (in the case of a B2B setup). Depending on the hardware version, the stone should be placed either under service lighting or backlight (shadow lighting). This lighting will either turn on automatically when the cover is lifted, or you will need to do it manually by changing the preset in the software, for example, to "Shadow". The setup takes place in the Camera live view interface mode.
Setting the optimal region of interest (ROI) for filming
...
Click the Scan button. The software will switch to Scanning view mode. In this mode, you’ll see information on the scanning progress as a percentage, the estimated scanning time, and the estimated remaining time, elapsed scanning time.
...
Clicking the Cancel button will stop the scanning process and return you to Camera Live View.
During scanning, you can also enter the stone's metadata for Cutwise.
...
After completing the scan and entering the stone's information, you can initiate the upload of the film to Cutwise by clicking the Upload to Cutwise button. The film will be prepared for upload and sent to Cutwise via the Cutwise Agent. As soon as the upload begins, the software will switch to Camera live view, allowing you to start filming a new stone.
...