Versions Compared

Old Version 2

changes.mady.by.user Maxim Bashurov

Saved on

compared with

New Version Current

changes.mady.by.user Maxim Bashurov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The Print Label report contains reference line parameters:

Image RemovedImage Added

Parameter
DescriptionComment
Marking for Crown - C8 beforemmThe reference line for the crown main facets before table allowance.See the detailed description below.





Marking for Crown - C8 aftermmThe reference line for the crown main facets after table allowance.
Marking for Pav - P8 afterbeforemmThe reference line for the pavilion main facets before table allowance.
Marking for Pav - P8 aftermmThe reference line for the pavilion main facets after table allowance.
Table allowancemmTable allowance.
InclineTable inclinedeg.Planned table tilt compared to the current table.


Print Label example:

Image RemovedImage Added


Expand
titleMarking for CrownC8 after
Info
This parameter is applicable to the following cuts: Brilliant

Distance between the holder plane and C8 reference line after table allowance.

Calculation

FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM

Usage and Examples

C8 reference line information is used during polishing.

Reporting

Reported inSectionValuesUnitsBookmarksName in Reports

Print Label

NASingle valuemm

FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE

Marking for CrownC8 after

Visualization in Appraisers

ValueUnitsBookmarkTabParameter NameComment
NANANANA

NA

Not presented in any appraiser.
Expand
titleMarking for PavP8 after
Info
This parameter is applicable to the following cuts: Brilliant

Distance between the holder plane and P8 reference line after table allowance.

Calculation

  • Find the pavilion facet with the highest height, let us say its number is F
  • Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>

Usage and Examples

P8 reference line information is used during polishing.

Reporting

Reported inSectionValuesUnitsBookmarksName in Reports

Print Label

NASingle valuemm

FACETING_REFERENCE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after)

Marking for PavP8 after

Visualization in Appraisers

ValueUnitsBookmarkTabParameter NameComment
NANANANA

NA

Not presented in any appraiser.
Expand
titleTable polishing, mmallowance
Info
This parameter is applicable to the following cuts: Brilliant

Table allowance.

Image RemovedImage Added

Calculation

The maximum distance between perpendicular to the solution table plane and the facet of the current stone.

Usage and Examples

Information is used during polishing.

Reporting

Reported inSectionValuesUnitsBookmarksName in Reports

Print Label

NASingle valuemm

FACETING_TABLE_CUT_DEPTH

Table polishingallowance

Visualization in Appraisers

ValueUnitsBookmarkTabParameter NameComment
NANANANA

NA

Not presented in any appraiser.
Expand
titleTable polishing, degincline
Info
This parameter is applicable to the following cuts: Brilliant

Planned table tilt compared to the holder plane.

Image RemovedImage Added

Calculation

NA

Usage and Examples

Information is used during polishing.

Reporting

Reported inSectionValuesUnitsBookmarksName in Reports
Print Label
Single valuedegFACETING_TABLE_INCLINETable polishingincline

Visualization in Appraisers

ValueUnitsBookmarkTabParameter NameComment
NANANANA

NA

Not presented in any appraiser.