...
Comparative Interactive 3D View (Comparative I3D Mini View) represents the two selected stone models in 3D for comparison. Comparing with the standard Scene, in Comparative I3D Mini View, the models are displayed with a number of additional details mapped over the displayed facets.
Image Modified
Facet Identification
...
Info |
---|
Facet numbers are displayed only when the Facet Number check box is selected. |
Image Modified
Also, the main facet numbers are displayed in the tooltip shown on mouse over the facet.
Image Modified
Displaying Model Mass in Correspondence with Plan List
...
- Scan name (for example, "Imported Model") or plan number (for example "1"), followed by (in brackets):
- Cutting name
- Model mass, ct
Image Modified
For the scan, the displayed mass will be in correspondence with the mass displayed in the plan list. This may be:
Image Modified
Distance from Reference/Current
In Comparative I3D Mini View, two special modes are available:
- Distance from Reference, µm
- Distance from Current, µm
Distance from Reference, µm | Distance from Current, µm |
---|
Image Added | Image Added |
- A - intersection of facet of reference and normal to it
- B - from all the projections of facet of current onto normal - the one with minimum distance from the center
- C - from all the projections of facet of current onto normal - the one with maximum distance from the center
- A-B - Distance from Reference, µm
- A-C - Distance from Reference, µm
| - A - intersection of facet of current and normal to it
- B - from all the projections of facet of reference onto normal - the one with minimum distance to A
- A-B - Distance from Current, µm
|
Notes on meaning: |
- The less the difference between maximum and minimum, the more parallel the facets of current and reference are.
- Both values positive means the current is larger than the reference .
- If Distance from Reference , min is negative (like on the picture above), this means a part of the facet of current should be kept.
- Distance from Reference , max shows "how much should be cut in the correct direction" to get the result.
| - "How much more can be cut parallel to the facet of the current?"
- A positive value means the current is larger than the reference .
|
Here is an example:
Image Added
Image Added
Related Pages
Panel |
---|
Content by Label |
---|
showLabels | false |
---|
showSpace | false |
---|
cql | label in ("i3d","compare") and space = currentSpace() |
---|
|
|