Diamond allocation

1. New algorithm of diamond allocation 17. SmartZoom is introduced.

...

To define thresholds described in above list, please contact your distributor.

An area of 17. SmartZoom application:

1) Algorithm 17. SmartZoom is not effective where cutting has NO vertical girdle (for example, scanned ASCII cuts) and could return no extra weight.

2) Algorithm 17. SmartZoom is not effective for already existing SmartRecut solutions and could return the same weight of SmartZoom solutions if algorithm is run for SR solutions.

To use algorithm it is firstly required to get solution by any method - ether "recut" or "recut+smart recut" algorithms algorithm or import from Pacor or other possible for import program, select it in Plans&Scans tab of Allocation solution panel, then select 17. SmartZoom algorithm in the list of algorithms and press Run.

...

Sample, shown above of screenshots, is available for download SmartZoomDemo1_4.56ct_C4.oxg

Reports

1. I3D Mini Report improvements:
   
   1. Click on any facet  in I3D Mini View to select this facet. The facet will be marked. Use this as a visual mark or press "Rotate to door: Selected Facet" button in Scan&Build panel to rotate the selected facet to door.
      
      
   2. There is option to show I3D mini-report immediately after scan&build of model in Settings: Go to menu Settings / General Settings, select Automatic Actions tab and check box for I3D Mini View:
      
   3. There was some delay in mini I3D report visualization during switch to any solution. Since current version this delay is disappeared (after second switch to solution). Program caches data of mini-report for each solution after first switch to this solution, so beginning from second switch virtualization of data is immediate.
   4. Program remembers settings (mode and checked boxes) and selected position (Crown, Pavilion, ...) during restart of program.
      
      
2. Faceting Report is available.
   
   Details of faceting report generating are described here: Faceting Report
   
   
   
3. New parameters TableGirdleSimiliarity, CrownSlopeDeltaCW, CrownSlopeDeltaWP for Oval cutting are added.

4. New Oval cuttings are available in Cutting list:
   
   
   There are totally following Oval shapes are available:

   Oval_WBT_C32_G64_P24_2017_JUN_21	Oval_C32_G64_P24_2017_JUN_21	Oval_C32_G64_P20_2017_JUN_21

   Oval_C32_G64_P22_2017_JUN_21	Oval_WBT_Shifted_C32_G64_P24_2017_JUN_21	Oval_WBT_C32_G64_P24

   Note that first cutting Oval_WBT_C32_G64_P24_JUN_21 and last cutting Oval_WBT_C32_G64_P24 has the SAME topology but first is the newest and has more parameters and can result in better solutions. So we recommend to use first cutting Oval_WBT_C32_G64_P24_JUN_21.

5. Athena cut position in report now caclulates through rotation axis. All crown and pavilion facets are recognized as main facets:

GUI

1. Demo samples are available from menu File/Demo...
   New samples for SmartZoom are added as demo - SmartZoomDemo1_4.56ct_Cushion_C4 and SmartZoomDemo2_2.31ct_Cushion_C10.

...