The Print Label report contains reference line parameters:
Parameter | Description | Comment | |
---|---|---|---|
C8 before | mm | The reference line for the crown main facets before table allowance. | See the detailed description below. |
C8 after | mm | The reference line for the crown main facets after table allowance. | |
P8 before | mm | The reference line for the pavilion main facets before table allowance. | |
P8 after | mm | The reference line for the pavilion main facets after table allowance. | |
Table allowance | mm | Table allowance. | |
Table incline | deg. | Planned table tilt compared to the current table. |
Print Label example:
Distance between the holder plane and C8 reference line after table allowance. Calculation FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM Usage and Examples C8 reference line information is used during polishing. Reporting
Visualization in Appraisers
|
Distance between the holder plane and P8 reference line after table allowance. Calculation
Usage and Examples P8 reference line information is used during polishing. Reporting
Visualization in Appraisers
|
Table allowance. Calculation The maximum distance between perpendicular to the solution table plane and the facet of the current stone. Usage and Examples Information is used during polishing. Reporting
Visualization in Appraisers
|
Planned table tilt compared to the holder plane. Calculation NA Usage and Examples Information is used during polishing. Reporting
Visualization in Appraisers
|