This parameter is applicable to the following cuts: AnyCut (only when performing SmarRecut via Relative appraiser). |
Defines how much (in %) the angle between normals of any neighboring facets can deviate after Smart Recut comparing to Recut.
If at least one of the neighboring facets is girdle or culet, the limitation is not applied. The girdle shape is controlled by the Girdle Shape Tolerance parameters. The culet is not taken into account. |
Calculation The parameter is set manually via preset and control the rule: A(1+min/100) < B < A(1+max/100) Where:
Usage and Examples If the parameter set to "-25, 50" and the angle between normals of neighboring facets after Recut (A) is "10°" then:
Reporting
Visualization in Appraisers
|
This parameter is applicable to the following cuts: AnyCut (only when performing SmarRecut via Relative appraiser). |
Sets limitation “not less than this value” for the angle between normals of any neighboring facets.
If at least one of the neighboring facets is girdle or culet, the limitation is not applied. The girdle shape is controlled by the Girdle Shape Tolerance parameters. The culet is not taken into account. |
Calculation The parameter is set manually via preset. Usage and Examples Should be used to avoid transforming the neighboring facets into a single plane. The current default values are: Reporting
Visualization in Appraisers
|