HP Carbon supports integration with Cutwise online service - diamond presentation and comparison engine. Main use cases for the integration are described in the sections below.
You can quickly share via the Internet your stone information using an integration of HP Carbon, DiBox 2.0, and Cutwise OctoNus products.
To do that:
Some details and example are presented in the video:
After obtaining the set of SmartRecut solutions, it is an essential task to compare them to select one or several best. HP Carbon provides tools for this comparison. But these tools separately or combined not always provide the best experience for solutions comparison task. The OctoNus Cutwise online service offers an extended set of tools for presenting and comparison of brilliants and their models. HP Carbon supports integration with Cutwise: the models from HP Carbon may be sent in one click to the Cutwise where they can be further visualized and analyzed with the rich set of tools.
One of the main advantages of Cutwise is new generation of virtual films. They are renderings of future stones, indistinguishable from the real DiBox2 films for both Round and Fancy cuttings. This allows effective visual comparison of future solutions. Moreover, the additional visual metrics are built on the basis of the films and comparison by these metrics become available. The Cutwise uses special film generating systems that have a naturally high consumption of the hardware resources and time. As the Cutwise cloud keeps film calculations server-side, it frees up resources of the HP Carbon machine as well as the time of an operator.
The Cutwise has a modern web interface. It includes advanced, effective tools for:
Stone visual and parametric representation.
Saving you selections as separate sharable collections.
Also, being accessible via Internet 24/7, Cutwise is a great place to share created stone collections. You can share them with the colleagues to demonstrate stones and delegate or share decision making responsibilities. You can also present full stone information to future customers.
Detailed information and the example you can find in the video:
To use the integration, the following conditions should be met:
You need an account on cutwise.com*. This account should have permission to generate the Photoreal Data. To get an account or permissions, contact Cutwise support.
|On the first data upload, you will be requested for Username and Password of your Cutwise account.|
You have two ways of uploading your data to Cutwise:
It is important to remember, that if you use the Upload to Cutwise function in HP Carbon, you should not use the manual approach for the same data, because after Upload to Cutwise is used if you try to manually upload the same models/reports, you will not see the new data in Cutwise - the one previously uploaded from the system with the Upload to Cutwise function will stay unchanged.