There are two cases when you need to select an appraiser:
By default, the system automatically selects the appraiser for the selected cut. The table below describes system behavior:
Scenario | Description |
---|---|
Allocation, 1 cut | Process: you select the cut, then click Start Allocation. Result: The linked appraiser* will be used automatically (and the last selected Profile of it) |
Allocation, more than 1 cut | Process: you select the cuts, then click Start Allocation. Result: The linked appraiser* will be used automatically (and the last selected Profile of it) for each included cut. |
Appraisal of already existing solutions | In the Plans & Scans section, you click the solution, in the Appraiser section, the system automatically displays the linked appraiser. When your switch between the solutions of different cuts, the appraiser changes correspondingly. |
* In the system, cuts and appraisers are linked like this:
Cut | Appraiser*** |
---|---|
In-house cut that has its** appraiser | Its appraiser |
In-house cut without its appraiser | MyAnyCut |
Brilliant | "GIA Facetware + MyRound" |
CushionSquare_PM4_PG8_PH24_PBrill_C32 | CushionSquare |
CushionRectangular_PM4_PG8_PH24_PBrill_C32 | CushionRectangular |
Some oval cuts | MyOval |
Other cuts | Lexus_Opt...**** |
** Its appraiser means created specifically for this particular cut
*** For each appraiser, its active profile will be used - the one that was last selected in the user interface Profile field.
**** Cuts linked to the "Lexus_Opt..." appraiser have limitations:
See details in the sections below.
The automatic appraiser selection eases your work with multiple cuts:
How to use:
Note that you do not need to do anything but selecting wished cuts and running allocation. Optionally: to view the linked appraiser and its current active profile in the Appraiser section, select Cut from the list. Change active Profile if needed. Note that the Profile field will be empty if the appraiser does not have any profiles. |
The automatic appraiser selection greatly eases getting excellent diamonds of different cuts within one solution (via the multi-diamond algorithms, such as 13. Cascade-2M and + Smart Recut option).
New: now you can get a combination of your in-house cut and one of standard (for example, Brilliant linked to "GIA Facetware + MyRound") cuts within one solution. |
Running multi-diamond allocation with Smart Recut
(Prerequisites: gold stars will be used - see instruction on how to configure them in the section below)
To get "Smart Recut + Smart Recut" solutions with the different Smart Recut presets:
"Gold stars" configuring
The "gold star" shows which Smart Recut preset will be used for the active profile of the linked appraiser when running allocation for multiple cuts with a multi-diamond algorithm with + Smart Recut option. There is a default gold star for each profile of each appraiser working with Smart Recut. Thus, you can skip configuring gold stars - in this case, the default will be used (for MyRound profiles - preset №4, for MyOval and MyOvalPerformanceWare - №6, for MyAnyCut and alike - №8).
Notes on structure:
Notes on usage:
|
The gold stars can be configured before running allocation as described below.
To configure gold stars:
If, in your solution list, you have solutions of different cuts and you want the appropriate appraiser to be selected automatically when you switch to this solution:
To know which appraiser is linked to some cut and/or switch the active profile:
Option A: Solution of appropriate cut in the list | Option B: Not in the list |
---|---|
Sometimes it may be necessary to try appraisal or running allocation with the appraiser, different from the linked one.
To do so, switch to the manual mode: in the Appraiser section, select the Manual appraiser selection checkbox.
To switch back to the automatic appraiser selection, deselect the checkbox.