This is manual for Groove model building method.
In order to use Groove feature you will need following:
All except HASP key can be download here.
1. Setup "Auotodelete objects" settings in way shown on picture:
2. Place a diamond on a holder on the table:
3. Select task mode "Scan & Build", scan mode "Diamond", cutting "P-O-M-H-R" and precision desired. Click "Start" button. Rename model as "Heart_Base":
4. Set diamond in such way that one it shoulder laying on the holder and table is perpendicular to camera direction. In HPP you should see similar picture:
Please pay attention that table should be perpendicular to camera direction with mistake below 5°. You can use motor system control to adjust brilliant position. |
5. Switch "Scan mode" to "Groove". Open "Figures" panel, select "Heart_Base" model and drug&drop it to "Sample" field:
6. Click on "Start" button.