This is manual about Cutting Sample List model building method improvements. Document tell you how to use improvement. Create groups samples and etc.
In previews version of programs Sample model building method requires to much steps to be applied:
With Cutting Sample List feature you can save time working with sample cutting model building method:
In order to use Cutting Sample List feature you will need following:
Recommended to use following libraries with HeliumPolish.exe:
If you need to use models stored in .dll , please use DiamCalc to convert them to .dmc or .asc. |
1. Click on ">" button on "Scan polished diamond" panel:
2. Select "Open cutting sample panel" option from drop-down menu:
3. Click on "Cancel" button to create new cutting sample list or select list saved before:
4. Click on "x" button and select "Switch to administrative mode" option:
5. Right-click on Cutting Group area (marked with blue frame) and select "Create Empty Group" option from drop-down menu:
6. New empty group named "Group" is created. Click on marked with blue frame area and edit group name:
7. Press "Enter" button after editing:
8. Repeat steps 4.1.5-4.1.7 until all needed groups are created. Create at least two groups doing that instruction.
1. Right-click on Sample area (marked with blue frame) and select "Load Sample" option from drop-down menu. File browsing is the same as in 4.2.2 step:
Please pay attention that:
|
2. In "Import cutting from file" window (red frame) your can select file for import. Pay attention that model from highlighted with grey file is pre-shown on "Scan polished diamond" panel (yellow frame). And name for import cutting model is "__Imported" (bottom blue frame) or copied from file name for asc files:
3. New cutting sample is added. Click on marked with blue frame area and edit it name:
4. Press "Enter" button after editing:
1. Pressing ">" button with your cutting sample list customized will show list of cuttings included into selected group (yellow frame). Selected cutting is highlighted with green:
2. To switch groups you point mouse cursor on "Select cutting sample" option and click on group needed. Or point on groups and click on cutting sample needed, in that case group will be automatically switched to group contained selected cutting sample:
On picture above:
3. You can use Cutting Sample panel to switch between groups, just selecting group in panel list, active group is highlighted:
1. Supposed that at this instruction step all needed actions are done, so switch off administrative mode on Cutting Sample panel:
2. In order to save your cutting sample list click on "x" button and select "Export cutting sample list" option:
3. In order to load your cutting sample list click on "x" button and select "Import cutting sample list" option:
or click on ">" button on "Scan Polished diamond" panel and select "Import cutting sample list" option:
1. Cutting samples can be imported by clicking on ">" button and selecting "Load diamond sample from file" option:
2. In "Import cutting from file" window (red frame) your can select file for import. Pay attention that model from highlighted with grey file is pre-shown on "Scan polished diamond" panel (yellow frame). And name for import cutting model is "__Imported" (blue frames) or copied from file name for asc files. That name can be editing by clicking bottom blue frame (picture is clickable for bigger size):
Please pay attention that secondary import from file will remove from HP Pacor first imported model. |
1. Create your own cutting sample list according to steps above and save it to "Cutting_Samples.ccf" file and close HP Pacor program
2. Copy "Cutting_Samples.ccf" file to root directory of HP Pacor program
3. Add to HeliumBat.ini following string:
LoadCuttingSamples Cutting_Samples.ccf