• Download and install the StereoMovieViewer.exe file;
• Start the software: 
  
  
  
• Press the Open button  to open an movie or a series of photos;
• Select a movie  (single selection) or series of photos (folder selection or multiple files selection);
  
• Press the Open button;
• Select the movie type in the dialog (it only appears if the movie type cannot be selected automatically)
• The requested movie appears, as a result:
  

• Press the Play button    to start the movie;
• To switch on/off the stereo mode, press button   ;
• To activate the fullscreen mode, press Enter or double-click anywhere in the window ;
• To exit the fullscreen mode press Enter or Esc;
• To adjust settings, stop playing the movie and press button  ;
• The Settings dialog box will appear:

• Set the Frames Rate (fps);
• Check the Round checkbox to loop the movie;
• Select the Stereo Mode:
  • Anaglyph (Red/Blue) - for red-blue stereo glasses;
  • Interlaced (Polarized) - for interlaced polarized stereo glasses;
  • Graphics Driver  - for NVIDIA 3D Vision stereo glasses or Smart TV.
• Select the Split Type:
  • Side by Side (Left first)
    

With this split type, the initial frame is split by a vertical line into two images intended for the left and the right eye, respectively. This is a widespread content type.

• • Frame Shift (Left first)
    

With this split type, the images for the left and the right eye produce a stream of somewhat shifted frames. This split type is suitable for movies with rotating objects.

• • Over / Under (Left top)
    

With this split type, the initial frame is split by a horizontal line into two images intended for the left and the right eye, respectively. This is a rare content type.

For comfort stereo viewing:
In the Side by Side mode, adjust Frame Distance.

In the Frame Shift mode, adjust Frame Distance and Frame Shift:

Note. To change the parameter values, use the mouse or the left and the right arrow keys of the keyboard.