Release contains:
File | Version |
---|---|
HeliumPolish.exe | 5.6.91.1 |
report.dll | 2.10.34.1 |
BrilRecon.dll | 1.1.24.1 |
ikov.dll | 1.1.3.9 (not changed) |
Report templates | 2017-04-05 |
In this version we made the following changes:
Algorithm for building girdle for Octagon cut is improved (Please use Brilliant method for Octagon cut).
Previous release | Current release |
---|---|
Corrected mass is now displayed in the reports as two values, namely, with 2-digit and 4-digit precision.
Please note that CORRECTED_MASS_2 and WEIGHT_CT bookmarks are not affected by digit precision option, so it has 2 digit precision in any case.
Reported in | Section | Units | Bookmarks |
---|---|---|---|
| Top |
|
|
CORRECTED_MASS_4 (4 digits, new bookmark) |
Lower Facet Length parameter is added for Cushion cuts.
It is defined as the projected distance from the junction of the main pavilion facets to the corresponding side of the girdle, and reported separately for all four sides.
Reported in | Section | Values | Units | Bookmarks |
---|---|---|---|---|
Full Report for Cushion | Main Parameters | Avg, Min, Max, Dev at each direction | Both %(diameter) and mm |
|
Detailed Parameters | Individual values (2 at each direction) | Both %(diameter) and mm | LOWER_FACET_LENGTH_0_1, LOWER_FACET_LENGTH_0_2, LOWER_FACET_LENGTH_90_1, LOWER_FACET_LENGTH_90_2, LOWER_FACET_LENGTH_180_1, LOWER_FACET_LENGTH_180_2, LOWER_FACET_LENGTH_270_1, LOWER_FACET_LENGTH_270_2 |
For a non-standard Cushion cut having four Crown Main Width and four Crown Main Length facets, all four individual measurements for their slopes, azimuths, and heights are now reported.
Reported in | Section | Values | Units | Bookmarks |
---|---|---|---|---|
Full Report for Cushion | Detailed Parameters | Individual values #3, 4 | ° | CRN_MAIN_WIDTH_ANGLE_DEG_3, CRN_MAIN_WIDTH_ANGLE_DEG_4, CRN_MAIN_WIDTH_AZIMUTH_DEG_3, CRN_MAIN_WIDTH_AZIMUTH_DEG_4, CRN_MAIN_LENGTH_ANGLE_DEG_3, CRN_MAIN_LENGTH_ANGLE_DEG_4, CRN_MAIN_LENGTH_AZIMUTH_DEG_3, CRN_MAIN_LENGTH_AZIMUTH_DEG_4, |
Note that the Avg, Min, Max, and Dev values for these parameters were already calculated correctly before this change. All four individual measurements were taken into account. Also, the missing measurements were correctly displayed on the pictures. |
Algorithm for detection wing facets is improved:
Previous release | Current Release |
---|---|
Algorithm for facet type detection is improved for Round Fancies:
Previous release | Current Release |
---|---|
Algorithm for girdle internal angle calculation is improved.
Previous release | Current Release |
---|---|
Pavilion and crown facets type bad recognition on RBC is improved:
Previous release | Current Release |
---|---|
Radiant and square radiant facet height measurement is changed: