Faceting Report contains information about the stages and steps of polishing created for the selected solution. For each step, the report represents information about a facet location and shape before, during and after the polishing.
Faceting Report can be built either for the entire stage (that is for all facets of the same type) or for the selected step and all its predecessors.
The Faceting Report for each step contains information about:
Parameter | Description |
---|---|
Azimuth, ° | Current, target, and difference between them. |
Slope, ° | Current, target, and difference between them. |
Slope allowance | Slope allowance. |
Azimuth allowance | Azimuth allowance |
Distance to reference line (µm) | Considers all the facets of the pavilion excluding extra facets. The line is drawn in parallel to the table on the lowest point of the lowest facet of the pavilion |
Processing depth | Is displayed for 5, 30, 50, 70 and 100% of processing, including width (mm), height (mm) and a ratio (W/H). |
To generate a Faceting Report for the solution:
From the context menu, select Show Report.
The faceting report is generated and displayed in your default browser.
The information provided in this section is only available under the "Developer" HASP key. |
To view the generated faceting stage, open "Tree" developer panel.
In the developer tree you can see generated stages and make some operations with them (delete stage and show report) by right-click on a stage item.
Here you also can see steps of the generated stage in the scene by left-click on a step item.
Inthetreeyoucan set step properties and export a step model to .mme filebyright-clickona step item.
Step properties dialog contains options to configure step visualization in the scene.
Here you can disable/enable showing sections for a step.
Also in the dialog could be set cut progress for a step in percentages, a corresponding to it processing depth is visible in mm.