Here you can find information about what is new in Oxygen Server Microscope and Oxygen Immersion version 5.1.
The functionality described in this section is available both in Oxygen Server Microscope and Oxygen Immersion.
In the View menu now the Show Grid item is presented which shows/hides the grid in the Scene.
Sometimes in the system, specifically in cases of not calibrated microscopes, there is a gap between data of encoder and a microscope motor. In case of such discrepancies, the corresponding information appears in the log panel. Previously, the log was overloaded with this type of information. Now the output is improved so that you obtain information about the discrepancy of the encoder and motor data only needed amount of times, which information is later episodically repeated from time to time just to remind you about the case. The log is no more overloaded with this information.
For the on-screen text, the character map has been extended to include some frequently used symbols like degree sign and others.
The following fixes for the known problems and improvements have been implemented:
During the microscope calibration, when specifying the reference marks for the calibrating cube, the marks were not displayed. This error has been fixed - now the marks are displayed.
The functionality described in this section is available only in Oxygen Immersion.
The following fixes for the known problems and improvements have been implemented:
The information in this section is for sharing with Lexus only.
Ximea & FLIR cameras are now supported.
Previously, on the initial calibration of a microscope, the automatically created "alignment.bin" file was empty, which led to all alignment parameter values set to "0". Now the read-only Zoom Rotation is set to 90° which is visualized in the Alignment Data dialog, available on Alignment > Show alignment panel.
Working with the Alignment Data dialog is the part of the MBox hardware-software alignment. The Alignment menu and the Alignment Data dialog availability conditions are described here. |
The following fixes for the known problems and improvements have been implemented:
The Rx Initialization stability test dialog was unavailable. Now the dialog is available again.
The Alignment menu and all its dialogs availability conditions are described here. |