Release contains:

FileVersion
HeliimPolish.exe5.6.80.1
report.dll2.7.6.1
Reports templates2015-11-26

 

 In this version we made following changes:

  1. New parameters and bookmarks are added in reports:
    1. Following parameters are added to Full_report_for_brilliant.rtf (which were presented early in Appraiser Editor HPO panel (Cut and Symmetry Tabs) but absent in Polish Reports):
      1. Girdle height bezel local Deviation (%) (GirdleBezelLocal in Appraiser Editor HPO panel):
        GIRDLE_HEIGHT_BEZEL_LOCAL_DEV_PC_AVG
        GIRDLE_HEIGHT_BEZEL_LOCAL_DEV_PC_MIN
        GIRDLE_HEIGHT_BEZEL_LOCAL_DEV_PC_MAX
        GIRDLE_HEIGHT_BEZEL_LOCAL_DEV_PC_DEV
        GIRDLE_HEIGHT_BEZEL_LOCAL_DEV_PC_1..8
      2. Girdle height bone local Deviation (%) (GirdleBoneLocal in Appraiser Editor HPO panel):
        GIRDLE_HEIGHT_BONE_LOCAL_DEV_PC_AVG
        GIRDLE_HEIGHT_BONE_LOCAL_DEV_PC_MIN
        GIRDLE_HEIGHT_BONE_LOCAL_DEV_PC_MAX
        GIRDLE_HEIGHT_BONE_LOCAL_DEV_PC_DEV
        GIRDLE_HEIGHT_BONE_LOCAL_DEV_PC_1..8
      3. Girdle height valley local Deviation (%) (GirdleValleyLocal in Appraiser Editor HPO panel):
        GIRDLE_HEIGHT_VALLEY_LOCAL_DEV_PC_AVG
        GIRDLE_HEIGHT_VALLEY_LOCAL_DEV_PC_MIN
        GIRDLE_HEIGHT_VALLEY_LOCAL_DEV_PC_MAX
        GIRDLE_HEIGHT_VALLEY_LOCAL_DEV_PC_DEV
        GIRDLE_HEIGHT_VALLEY_LOCAL_DEV_PC_1..16
      4. Sum painting (°) (SumPainting in Appraiser Editor HPO panel):
        GIA_SUM_PAINTING_DEG
      5. Star Facet Twist Symmetry (°) (StarFacetTwist in Appraiser Editor HPO panel):
         STAR_FACET_TWIST_AVG
        STAR_FACET_TWIST_MIN
        STAR_FACET_TWIST_MAX
        STAR_FACET_TWIST_DEV
        STAR_FACET_TWIST_1..8
      6. Opposite Azimuth consists of 3 parameters:
        1. Opposite Azimuth Pavilion (°):
          PAV_OPPOSITE_AZIMUTH_AVG
          PAV_OPPOSITE_AZIMUTH_MIN
          PAV_OPPOSITE_AZIMUTH_MAX
          PAV_OPPOSITE_AZIMUTH_DEV
          PAV_OPPOSITE_AZIMUTH_1..4
        2.  Opposite Azimuth Crown (°):
          CRN_OPPOSITE_AZIMUTH_AVG
          CRN_OPPOSITE_AZIMUTH_MIN
          CRN_OPPOSITE_AZIMUTH_MAX
          CRN_OPPOSITE_AZIMUTH_DEV
          CRN_OPPOSITE_AZIMUTH_1..4
        3. Opposite Azimuth Crown-Pavilion (°):
          PAV_CRN_OPPOSITE_AZIMUTH_AVG
          PAV_CRN_OPPOSITE_AZIMUTH_MIN
          PAV_CRN_OPPOSITE_AZIMUTH_MAX
          PAV_CRN_OPPOSITE_AZIMUTH_DEV
          PAV_CRN_OPPOSITE_AZIMUTH_1..8

          In Appraiser Editor HPO panel we have OppositeAzimuth, it is maximum from last 3 parameters, we will add this parameter in next version.

      7. Girdle Angle Max (°) (GirdleAngleMax in Appraiser Editor HPO panel):
        GIA_GIRDLE_ANGLE_MAX_DEG

        1. Main Crown Facets Azimuth Symm 1 (°):
          MAIN_CRN_FACET_AZIMUTH_SYM_DEG1
        2. Main Crown Facets Azimuth Symm 2 (°):
          MAIN_CRN_FACET_AZIMUTH_SYM_DEG2

        1. Main Pavilion Facets Azimuth Symm 1 (°):
          MAIN_PAV_FACET_AZIMUTH_SYM_DEG1
        2. Main Pavilion Facets Azimuth Symm 2 (°):
          MAIN_PAV_FACET_AZIMUTH_SYM_DEG2

        1. Star Facets Azimuth Symm 1 (°):
          STAR_FACET_AZIMUTH_SYM_DEG1
        2. Star Facets Azimuth Symm 2 (°):
          STAR_FACET_AZIMUTH_SYM_DEG2

        These last 3 groups of parameters are separated to 1 (…_DEG1) and 2 (…_DEG2) because in SR we have different grade of deviation for 1st class and 2nd class . 1st class means maximum from maximal deviations between azimuths of concrete facet and neighbouring facets and opposite facets but 2nd class means maximum from maximal deviations between azimuths of concrete facet and any other facets from the same group (groups and crown mains, pavilion mains and star facets) .


        1. Opposite Slope Sum Pavilion (°):
          PAV_OPPOSITE_SLOP_SUM_AVG
          PAV_OPPOSITE_SLOP_SUM_MIN
          PAV_OPPOSITE_SLOP_SUM_MAX
          PAV_OPPOSITE_SLOP_SUM_DEV
          PAV_OPPOSITE_SLOP_SUM_1..4
        2. Opposite Slope Sum Crown (°):
          CRN_OPPOSITE_SLOP_SUM_AVG
          CRN_OPPOSITE_SLOP_SUM_MIN
          CRN_OPPOSITE_SLOP_SUM_MAX
          CRN_OPPOSITE_SLOP_SUM_DEV
          CRN_OPPOSITE_SLOP_SUM_1..4

        In Appraiser Editor HPO panel we have OppositeSlopeSum, it is maximum from Opposite Slope Sum Pavilion and Opposite Slope Sum Crown, we will add this parameter in next version.



    2. Parameters Girdle height method (GIRDLE_HEIGHT_METHOD) и Girdle center method (GIRDLE_CENTER) for following report templates:
      Full_report_for_brilliant.rtf
      Full_report_for_cushion.rtf
      Full_report_for_princess.rtf
      Full_report_for_radiant.rtf
      Full_report_for_rounded_fancies.rtf
      Full_report_for_semi-polished_princess_rectangular.rtf
      Full_report_for_square_radiant.rtf
      Full_report_for_step_cuts.rtf



    3. Misprint in parameter is fixed: "Dug" should be "Dig" for:
      HTML_report_for_brilliant.htm
      HTML5_Illustrated_report_for_brilliant.html
      Illustrated_report_for_brilliant.rtf
      Full_report_for_brilliant.rtf

  2. New facets type recognition for cushion with 8 pavilion mains:

    Before report.dll version 2.7.4.1

    Since report.dll version 2.7.4.1

      

    First query regarding support of 8-pavilion mains of Cushion in Export All we will add in next version.

  3. Determination of marquise\oval and radiant\princess is improved.

  4. Improvement of 2-fold axis symmetry pictures – now program uses ideal “net” of azimuths instead of zero azimuth of first facet.

    Before report.dll version 2.7.5.1

    Since report.dll version 2.7.5.1

     
  5. Girdle center for models of Heart with groove calculation is improved.
  6. Since this version we keep settings of “GIA Heights” and “Girdle Center” and “Decimal Digits” boxes in System Registry of HPP, before it was in Windows registry. 
  • No labels