Page tree
Skip to end of metadata
Go to start of metadata

Release contains:

FileVersion
HeliumPolish.exe5.6.89.1 (not changed)
report.dll2.10.11.1

BrilRecon.dll

1.1.19.1
ikov.dll1.1.3.9 (not changed)
Report templates2016-11-18

In this version we made the following changes:

Model building

Algorithm for distinguishing Round Brilliant from Cushion, Oval from Cushion and Oval from Marquise is improved.

A sample Cushion stone which was previously incorrectly determined as Oval: Cushion_quasi_Oval.Mmd.

Reports

New pictures in reports for RBC

Full report for brilliant and the corresponding Export report data are enhanced with the following new pictures:

  1. Pavilion and crown views with slope angles for main facets only (see the Facets slope and azimuth angles chapter of the report):

    The bookmarks for the pictures are PAVILION_MAIN_FACET_SLOPE_ANGLES and CROWN_MAIN_FACET_SLOPE_ANGLES, correspondingly.

  2. Pavilion and crown views with azimuth angles for main facets only (see Facets slope and azimuth angles):

    The bookmarks for the pictures are PAVILION_MAIN_FACET_AZIMUTH_ANGLES and CROWN_MAIN_FACET_AZIMUTH_ANGLES, correspondingly.

  3. Pavilion and crown views without any markings and without invisible edges (see Additional illustrations):

    The bookmarks for the pictures are PAVILION_VIEW and CROWN_VIEW, correspondingly.

  4. Crown view with girdle thickness markings (see Additional illustrations):
     
    The bookmark for the picture is GIRDLE_THICKNESS_PC_CRN_VIEW.

  5. Crown view with minimum inscribed circle, also containing the angles of minimum and maximum width (see Additional illustrations):

    The bookmark for the picture is CROWN_AND_INSCRIBED_CIRCLE.

Octagon Brilliant cut and report

Octagon Brilliant cut is added as a sub-option to Round Brilliant cut. It is distinct for reporting purposes only; to scan and build models of this cut, Brilliant option should be used.

Octagon Brilliant has the following unique features:

  1. Instead of diameter and radius defined for Round brilliant, two specific parameters are calculated and reported: Base Diameter and Corner Diameter.

    Reported inSectionValuesUnitsBookmarks



    Full Report for Brilliant

    Main ParametersAvg, Min, Max, Dev for both

    mm

    DIAMETER_BASE_MM_AVG, DIAMETER_BASE_MM_MIN, DIAMETER_BASE_MM_MAX, DIAMETER_BASE_MM_DEV,
    DIAMETER_CORNER_MM_AVG, DIAMETER_CORNER_MM_MIN, DIAMETER_CORNER_MM_MAX, DIAMETER_CORNER_MM_DEV

    Detailed ParametersAll 4 values for bothmm

    DIAMETER_BASE_MM_1, ..., DIAMETER_BASE_MM_4,
    DIAMETER_CORNER_MM_1, ..., DIAMETER_CORNER_MM_4



  2. Width is interpreted as the minimum value of Base Diameter. Length is interpreted as the maximum value of Corner Diameter.
  3. Average Corner Diameter serves as a measure for all relative values in the report (that is, all lengths expressed in % are measured relative to it).
  4. The crown views with indicated positions of minimum and maximum width contain separate marks for minimum and maximum of Base Diameter and for those of Corner Diameter:

  5. Girdle internal angles at all eight corners are added to the list of parameters, and also to the girdle asymmetry plots.
     

    Reported inSectionValuesUnitsBookmarks


    Full Report for Brilliant

    Main ParametersAvg, Min, Max, Dev

    °

    GIRDLE_INTERNAL_ANGLE_DEG_AVG, GIRDLE_INTERNAL_ANGLE_DEG_MIN, GIRDLE_INTERNAL_ANGLE_DEG_MAX, GIRDLE_INTERNAL_ANGLE_DEG_DEV

    Detailed ParametersAll 8 values°

    GIRDLE_INTERNAL_ANGLE_DEG_1, ..., GIRDLE_INTERNAL_ANGLE_DEG_8



Triangle cut updates

Definitions of some Triangle cut parameters (Width, Length, Table Width, and Table Length) are updated in the following manner.

  1. Width as measured along the base side of the triangle, Length is measured perpendicular to that direction. (Previously these were defined vice versa.)
  2. Table width is defined as the maximum distance between table vertices in the direction of Width +/- 10°.
  3. The table vertex farthest away from the Width line is found.
  4. Table length is defined as the maximum distance from that vertex to another table vertex in the direction of Length +/- 10°.

"Area of projection" parameter

Area of projection of the stone to the table plane is added to the Full report for all cuts: 

Reported inSectionValuesUnitsBookmarks

Full Report (all cuts)

Main ParametersAvg (the only value)

mm²

PROJECTION_AREA

Min and max of Pavilion painting and Crown painting

Minimum and maximum Pavilion painting and Crown painting are added to the Full report for brilliant: 

Reported inSectionValuesUnitsBookmarks

Full Report for Brilliant

Main ParametersMin, Max

°

PAV_PAINTING_GIA_DEG_MIN, PAV_PAINTING_GIA_DEG_MAX,
CRN_PAINTING_GIA_DEG_MIN, CRN_PAINTING_GIA_DEG_MAX


Absolute maximum painting in the table above is renamed Max Dev, so as to avoid confusion. This is the signed measurement which has the maximum absolute value (i.e. either the overall maximum or minimum, depending on which is greater by the absolute value).

  • No labels