The Print Label report contains Table processing and reference line parameters are used during the polishing process:

Table Processing Parameters	Reference Line Parameters
Image Modified
*Plane A* goes through the point of the scan table farthest from the solution table and is parallel to the solution table.	*C8 reference plane*("line")

C

- crown main facets reference plane.

P8 reference plane ("line")

Pavilion Goes through the point of the

- pavilion main facets reference plane.

Plane A

New scan table

farthest from the solution table and

is parallel to the solution table

.New scan tableIs parallel to the solution table

and positioned differently depending on conditions (see Grind depth calculation in the detailed description).

Parameter

Panel

title	On this page:

Table of Contents

outline	true
style	none

Table Processing Parameters

DescriptionCommentC8 beforemm

Distance to C8 reference line before grinding from New scan table.

Calculated after the scan is bruted.See the detailed description below.C8 aftermmDistance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself).P8 beforemm

Distance to P8 reference line before grinding from New scan table.

P8 aftermmDistance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself).

Parameter		Description	Comment

Table allowance before	mm	How much should we grind parallel to the solution table to reach it - measured before grinding started.	See the detailed description below.
Grind depth	mm	How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting.
Table allowance parallel	mm	Distance between new scan table and solution table.
Table incline	deg.	Planned table tilt compared to the current holder plane.

...

Image Removed

Expand

title	C8 Table allowance before

Info
This parameter is applicable to the following cuts: All Cuttings

Distance to C8 reference line before grinding from New scan table.

Note
Calculated after the scan is bruted.

Image Removed

Calculation

Calculated after the scan is bruted by finding the distance between New scan table and C8 reference plane ("line"), where:

How much should we grind parallel to the solution table to reach it - measured before grinding started.

Image Added

Calculation

By finding the distance between Plane A and solution table, where:

Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table
New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
C8 reference plane ("line") is a crown main facets reference plane.

Usage and Examples

C8 reference line information Information is used during grinding.

Reporting

Reported in

Section

Values

Units

Bookmarks

Name in Reports

Print Label

NA

Single value

mm

Status

colour	Red
title	Information will be provided soon

C8 before

FACETING_TABLE_CUT_DEPTH

Table allowance

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Expand

title	C8 afterGrind depth

Info
This parameter is applicable to the following cuts: All Cuttings

Distance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself).

Note
Calculated after the scan is bruted.

Image Removed

Calculation

Calculated after the scan is bruted by finding the distance between C8 reference plane ("line") and solution table, where:

C8 reference plane ("line") is a crown main facets reference plane.

Formal definition:

FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM

Usage and Examples

How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting.

Image Added

Calculation

By finding the distance between Plane A and New scan table, where:

Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.
New scan table is parallel to the solution table and goes:

through the point of the scan table nearest to the solution table - if this nearest distance is positive (that is when fully grind the existing scan table, the solution is not touched);
at the distance of 20 µm from the solution table - if this nearest distance is negative (that is when fully grind the existing scan table, the solution is broken);
through solution table itself - if the maximum distance between the initial scan table and solution table is less than 20 µm (and nearest negative).

Image Added

Usage and Examples

Information C8 reference line information is used during grinding.

Reporting

Reported in	Section	Values	Units	Bookmarks	Name in Reports
Print Label	NA	Single value	mm	FACETING_REFERENCETABLE_LINE_CROWN_MAINS_AFTER_TABLE C8 after CUT_DEPTH	Table allowance

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Expand

title	P8 beforeTable allowance parallel

Info
This parameter is applicable to the following cuts: All Cuttings

Distance to P8 reference line before grinding from New scan table.

Note
Calculated after the scan is bruted.

Image Removed

Calculation

between the new scan table (the one used to set a stone on for bruting) and solution table.

Image Added

Calculation

By Calculated after the scan is bruted by finding the distance between the New scan table and P8 reference plane ("line") solution table, where:

New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
P8 reference plane ("line") is a pavilion main facets reference plane.
positioning is described in the Grind depth parameter.

Usage and Examples

P8 reference line information Information is used during grinding.

Reporting

Reported in

Section

Values

Units

Bookmarks

Name in Reports

Print Label

NA

Single value

mm

Status

colour	Red
title	Information will be provided soon

P8 before

NA

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Expand

title	P8 afterTable incline

Info
This parameter is applicable to the following cuts: All Cuttings

Distance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself).

Note
Calculated after the scan is bruted.

Image Removed

Calculation

Calculated after the scan is bruted by finding the distance between P8 reference plane ("line") and solution table, where:

P8 reference plane ("line") is a pavilion main facets reference plane.

Formal definition:

Find the pavilion facet with the highest height, let us say its number is F

Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>

Planned table tilt compared to the holder plane.

Image Added

Calculation

NA

Usage and Examples

P8 reference line information Information is used during grinding.

Reporting

Reported in	Section	Values	Units	Bookmarks	Name in Reports
Print Label	NA		Single value	mmdeg	FACETING_REFERENCE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after)P8 afterTABLE_INCLINE	Table incline

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Reference Line Parameters

Parameter		Description		Comment
C8 before	mm	Distance to C8 reference line before grinding from New scan table.	Calculated after the scan is bruted.	See the detailed description below.
C8 after	mm	Distance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself).
P8 before	mm	Distance to P8 reference line before grinding from New scan table.
P8 after	mm	Distance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself).

Expand

title	Table allowance C8 before

Info
This parameter is applicable to the following cuts: All Cuttings

How much should we grind parallel to the solution table to reach it - measured before grinding started.

Image Removed

Calculation

By finding the distance between Plane A and solution table, where:

Distance to C8 reference line before grinding from New scan table.

Note
Calculated after the scan is bruted.

Image Added

Calculation

Calculated after the scan is bruted by finding the distance between New scan table and C8 reference plane ("line"), where:

New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
C8 reference plane ("line") is a crown main facets reference planePlane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.

Usage and Examples

Information C8 reference line information is used during grinding.

Reporting

Table allowance

Reported in

Section

Values

Units

Bookmarks

Name in Reports

Print Label

NA

Single value

mm

FACETING_TABLE_CUT_DEPTH

Status

colour	Red
title	Information will be provided soon

C8 before

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Expand

title	Grind depthC8 after

Info
This parameter is applicable to the following cuts: All Cuttings

How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting.

Image Removed

Calculation

By finding the distance between Plane A and New scan table, where:

Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.

New scan table is parallel to the solution table and goes:

through the point of the scan table nearest to the solution table - if this nearest distance is positive (that is when fully grind the existing scan table, the solution is not touched);

at the distance of 20 µm from the solution table - if this nearest distance is negative (that is when fully grind the existing scan table, the solution is broken);

Distance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself).

Note
Calculated after the scan is bruted.

Image Added

Calculation

Calculated after the scan is bruted by finding the distance between C8 reference plane ("line") and solution table, where:

C8 reference plane ("line") is a crown main facets reference plane.

Formal definition:

FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM

Usage and Examples

C8 reference line information

through solution table itself - if the maximum distance between the initial scan table and solution table is less than 20 µm (and nearest negative).

Image Removed

Usage and Examples

Information is used during grinding.

Reporting

Table allowance

Reported in	Section	Values	Units	Bookmarks	Name in Reports
Print Label	NA	Single value	mm	FACETING_TABLE_CUT_DEPTH	_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE	C8 after

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Expand

title	Table allowance parallelP8 before

Info
This parameter is applicable to the following cuts: All Cuttings

Distance between the new scan table (the one used to set a stone on for bruting) and solution table.

Image Removed

Calculation

to P8 reference line before grinding from New scan table.

Note
Calculated after the scan is bruted.

Image Added

Calculation

Calculated after the scan is bruted by By finding the distance between the New scan table and solution table P8 reference plane ("line"), where:

New scan tablepositioning is described in the Grind depth parameter is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
P8 reference plane ("line") is a pavilion main facets reference plane.

Usage and Examples

Information P8 reference line information is used during grinding.

Reporting

NA

Reported in

Section

Values

Units

Bookmarks

Name in Reports

Print Label

NA

Single value

mm

Status

colour	Red
title	Information will be provided soon

P8 before

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

Expand

title	Table inclineP8 after

Info
This parameter is applicable to the following cuts: All Cuttings

Planned table tilt compared to the holder plane.

Image Removed

Calculation

NA

Distance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself).

Note
Calculated after the scan is bruted.

Image Added

Calculation

Calculated after the scan is bruted by finding the distance between P8 reference plane ("line") and solution table, where:

P8 reference plane ("line") is a pavilion main facets reference plane.

Formal definition:

Find the pavilion facet with the highest height, let us say its number is F
Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>

Usage and Examples

Information P8 reference line information is used during grinding.

Reporting

Table incline

Reported in	Section	Values	Units	Bookmarks	Name in Reports
Print Label	NA	Single value	degmm	FACETING_ TABLE_INCLINE	REFERENCE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after)	P8 after

Visualization in Appraisers

Value	Units	Bookmark	Tab	Parameter Name	Comment
NA	NA	NA	NA	NA	Not presented in any appraiser.

These parameters are presented in the Print Label report:

Image Added

Page tree

Versions Compared

Old Version 3

New Version 4

Key

Table Processing Parameters

Reference Line Parameters

Page tree

Page History

Versions Compared

Old Version 3

New Version 4

Key

Table Processing Parameters

Reference Line Parameters