Table processing and reference line parameters are used during the polishing process:
Table Processing Parameters | Safe Line Parameters |
---|---|
Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table. | Crown safe plane("line") - Crown Safe Line plane calculated for New scan table. |
Pavilion safe plane ("line") - Pavilion Safe Line plane calculated for New scan table. | |
New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description). |
Panel | ||||||
---|---|---|---|---|---|---|
| ||||||
|
Table Processing Parameters
Parameter | Description | Comment | |
---|---|---|---|
Table allowance before | mm | How much should we grind parallel to the solution table to reach it - measured before grinding started. | See the detailed description below. |
Grind depth | mm | How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. | |
Table allowance parallel | mm | Distance between new scan table and solution table. | |
Table incline | deg. | Planned table tilt compared to the current holder plane. |
Expand | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
How much should we grind parallel to the solution table to reach it - measured before grinding started. Calculation By finding the distance between Plane A and solution table, where:
Usage and Examples Information is used during grinding. Reporting
Visualization in Appraisers
|
...
Expand | ||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||
Planned table tilt compared to the holder plane. Calculation NA Usage and Examples Information is used during grinding. Reporting
Visualization in Appraisers
|
Safe Line Parameters
Parameter | Description | Comment | ||
---|---|---|---|---|
Distance to new scan table (crown) | mm | Distance to Crown Safe line before grinding from New scan table. | Calculated after the scan is bruted. | See the detailed description below. |
Distance to plane table (crown) | mm | Distance to Crown Safe line after solution table is reached (that is, distance to Crown Safe line from solution table itself). | ||
Distance to new scan table (pavilion) | mm | Distance to Pavilion Safe line before grinding from New scan table. | ||
Distance to plane table (pavilion) | mm | Distance to Pavilion Safe line aftersolution table is reached (that is, distance to Pavilion Safe line from solution table itself). |
Expand | ||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||
Distance to Crown Safe line before grinding from New scan table
Calculation Calculated after the scan is bruted by finding the distance between New scan table and Crown Safe line ("line"), where:
Usage and Examples Distance to new scan table (crown) information is used during grinding. Reporting
Visualization in Appraisers
|
...