Versions Compared

Old Version 4

changes.mady.by.user Maxim Bashurov

Saved on

compared with

New Version 5

changes.mady.by.user Maxim Bashurov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • For Comparative I3D Mini View, synchronization with the Scene did not work in some cases - now this is fixed.

    Note

    Models in Comparative Reports are aligned by the Current model now and in particular in Comparative I3D Mini View. Due to the modification of models' alignment calculation results in Comparative Reports is changed.

  • Facet Marking transfer for some cuttings is improved.
  • To improve Smart Recut allocation for the big (5ct+) round stones, to the "MyRound | GIA Facetware + MyRound" appraiser, the "MyRound_ H&A 5ct+" profile, the appropriate presets are added.
  • Minor further improvements are made for the Smart Recut mechanism of creating girdle extra facets. Read about this  mechanism improvement in the previous release on the 2020-08-11 - HP Carbon 1.0.0 page.
  • For the Princess cutting, the model building is improved - the Crown is now built better.
  • For the Smart Recut, when working with multi-diamond solutions from rough , described for the previous release (2020-08-11 - HP Carbon 1.0.0 page), some additional improvements are implemented:
    • Facet marking is copied along with the diamonds copied during Smart Recut
    • A bunch of Smart Recut attributes is copied along with the diamonds
  • Cutwise integration:
    • The Upload to Cutwise feature is now available on all HASP keys.
    • A new basis position is supported - "Culet" (= "Heart").
    • Solutions with cutting names in user locale were not uploaded to Cutwise - now this is fixed.
  • Bug with the episodic crash of the system during file opening is fixed.

  • Bug with the crash of the system during DZ Color calculation is fixed.

  • A rare bug when some system settings were reset to default values is fixed.

  • Autosave did not work - now this is fixed.

  • During the import of scanned ASCII, an error occurred (displayed on the picture below) caused by too strict limitations. Now limitations  are eased  to avoid error and allow using all scanned ASCII models.


  • The Rough recognition algorithm is improved.

    Expand
    titleSee example...
    WasNow

  • A system crash on running Smart Recut with AnyCut composite appraiser for some specific cuttings is fixed.

  • Fixed bug with wrong DZ Color Estimation of Main Scan if a project had several scanned or imported models. This issue was not affecting DZ estimation of solutions.

  • The wrong model rebuild for the Oval cutting is fixed.

  • In the Illustrated report for Cushion, on the image, some facet angles were not displayed - now this is fixed, all angles are presented.

  • Label printing is improved to work correctly with different page sizes.

  • The problem leading to an episodic crash of the Smart Normalize algorithm is solved.

  • The problem with  Comparative I3D Mini View freezing in some cases is solved.

  • The system rare crash during Cutwise upload is fixed.
  • In the I3D Report and View, for the Sakura cutting, the Table parameters were mistakenly displayed as "0.00" while they are not calculated at all - now they are displayed as "N/A".
  • Smart Recut crashed the system if Solutions Report was previously opened - now this problem is fixed.

  • The  Facet Marking  dialog:

    • When pointing a facet, "Tier" information was not displayed in the facet info block for "Tier 1" - now this is fixed.

      Expand
      titleShow example of the problem...

    • For the "Cylinder" cutting, the dialog did not open (the error was displayed instead) - now this is fixed.