Release contains:
...
File | Version |
---|---|
HeliimPolish.exe |
5.6.68.1 |
...
report.dll |
...
2. |
...
4. |
...
26.1 |
...
BriRecon.dll |
...
1. |
...
1. |
...
9.1 |
...
...
Reports templates | 2015-03-13 |
Please find new version of Helium Polish version 5.6.68.1 and corresponding DLL’s and new report templates here:
...
In this version we made following changes:
- Correct accounting and coloring of extra facets (E-mail from Janak on 25.12.2014, 8:27 AM, Subj: Extra facet – rules).
Currently girdle facets are shown by brown (steep - more than 75 degrees) and blue (shallow - less than 75 degrees).
Crown and pavilion extra facets are shown by magenta. If extra facet is made of several model facets then they are combined in one – look at blue girdle facet on Rear view below – extra facet is formed by 2 model facets but it is counted in report as 1 shallow girdle facet.
- Changes in algorithm of screening photos with too bright (intensity more than 250) pixels – currently only photos when we have 2 neighboring bright pixels (or more) will be eliminated (before even 1 bright pixel eliminates photo). So “Light duzzle in a row” message should not come if one pixel is bad. Kamal, please check on GIA HP23ProD scanner.
- We add algorithm which can build stepcut and baguette stones as in old versions of software: it is Cutting: Emerald in Scan polished diamond panel. So we have 1) :
- Cutting: Stepcut (here program choose best model among methods Stepcut, Emerald, Anycut)
- Cutting: Emerald ((here program choose best model among methods Stepcut, Emerald)
- .
- Error with unnecessary extra facets on round semipolished stone is fixed (E-mail from Nilesh on 26.02.2015, 3:55 PM, Subj: HELIUMPOLISH VERS:5.6.65.1 and BrilRecon.dll vers :1.13.1_BuguetteGirdle_RBC_Extra facet)
- Error when princess with large elongation is recognized as Emerald fixed (E-mail from Janak on 20.03.2014, 4:55 PM, Subj: FW: Helium for fancy and large rounds).
- Crown Curve data info missing for Marquise is fixed (E-mail from Nilesh on 11.02.2015, 4:04 PM, Subj: RE: Helium Polish version 5.6.65.1, BrilRecon.dll version 1.1.3.1, report.dll version 2.4.25.1) – please use new templates:
- We fixed some bug with wrong bookmarks in Full_report_for_brilliant.rtf for parameters Girdle-Culet offset by table axis, Girdle-Table offset by table axis and in all HTML reports for parameter Girdle to table-culet line offset in % and in mm.
Best regards, Sergey.