The Print Label report contains Table processing and reference line parameters are used during the polishing process:
Table Processing Parameters | Safe Line Parameters |
---|
Image Added |
Plane A goes |
Image Removed |
C8 reference plane("line")Crown main facets reference plane. | P8 reference plane ("line") | Pavilion main facets reference plane. |
Plane A | Goes through the point of the scan table farthest from the solution table and is parallel to the solution table. | Crown safe plane("line") - Crown Safe Line plane calculated for New scan table. |
Pavilion safe plane ("line") - Pavilion Safe Line plane calculated for New scan table |
Is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description). |
Parameter
Table Processing Parameters
Parameter |
| Description | Comment |
---|
Description | Comment | C8 before | mm | Distance to C8 reference line before grinding from New scan table. | Calculated after the scan is bruted. | See the detailed description below. |
---|
C8 after | mm | Distance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself). |
---|
P8 before | mm | Distance to P8 reference line before grinding from New scan table. |
---|
P8 after | mm | Distance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself). |
---|
Table allowance before | mm | How much should we grind parallel to the solution table to reach it - measured before grinding started. | See the detailed description below. |
---|
Grind depth | mm | How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. |
---|
Table allowance parallel | mm | Distance between new scan table and solution table. |
---|
Table incline | deg. | Planned table tilt compared to the current holder plane. |
---|
Print Label example:
...
Expand |
---|
title | C8 Table allowance before |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
Distance to C8 reference line before grinding from New scan table. Note |
---|
Calculated after the scan is bruted. |
Image Removed Calculation Calculated after the scan is bruted by finding the distance between New scan table and C8 reference plane ("line"), where: How much should we grind parallel to the solution table to reach it - measured before grinding started. Image Added Calculation By finding the distance between Plane A and solution table, where: - Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table
- New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
- C8 reference plane ("line") is a crown main facets reference plane.
Usage and Examples C8 reference line information Information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | mm | Status |
---|
colour | Red |
---|
title | Information will be provided soon |
---|
|
| C8 before | Table allowance |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Expand |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
Distance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself). Note |
---|
Calculated after the scan is bruted. |
Image Removed Calculation Calculated after the scan is bruted by finding the distance between C8 reference plane ("line") and solution table, where: - C8 reference plane ("line") is a crown main facets reference plane.
Formal definition: FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM Usage and Examples How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. Image Added Calculation By finding the distance between Plane A and New scan table, where: - Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.
- New scan table is parallel to the solution table and goes:
- through the point of the scan table nearest to the solution table - if this nearest distance is positive (that is when fully grind the existing scan table, the solution is not touched);
at the distance of 20 µm from the solution table - if this nearest distance is negative (that is when fully grind the existing scan table, the solution is broken); through solution table itself - if the maximum distance between the initial scan table and solution table is less than 20 µm (and nearest negative).
Image Added
Usage and Examples Information C8 reference line information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | mm | FACETING_TABLE_CUT_REFERENCEDEPTH_LINETO_CROWNWHITTLE_MAINSAWAY_AFTEREXISTING_TABLEMM
C8 after | Table allowance |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Expand |
---|
title | P8 beforeTable allowance parallel |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
Distance to P8 reference line before grinding from New scan table. Note |
---|
Calculated after the scan is bruted. |
Image Removed Calculation between the new scan table (the one used to set a stone on for bruting) and solution table. Image Added Calculation By Calculated after the scan is bruted by finding the distance between the New scan table and P8 reference plane ("line") solution table, where: - New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
- P8 reference plane ("line") is a pavilion main facets reference plane.
- positioning is described in the Grind depth parameter.
Usage and Examples P8 reference line information Information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | mm | Status |
---|
colour | Red |
---|
title | Information will be provided soon |
---|
|
| P8 beforeFACETING_TABLE_ALLOWANCE_TO_WHITTLE_AWAY_EXISTING_MM | NA |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Expand |
---|
title | P8 afterTable incline |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
Distance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself). Note |
---|
Calculated after the scan is bruted. |
Image Removed Calculation Calculated after the scan is bruted by finding the distance between P8 reference plane ("line") and solution table, where: - P8 reference plane ("line") is a pavilion main facets reference plane.
Formal definition:
- Find the pavilion facet with the highest height, let us say its number is F
- Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>
Usage and Examples Planned table tilt compared to the holder plane. Image Added Calculation NA Usage and Examples Information P8 reference line information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA |
| Single value | mmdeg | FACETING_REFERENCE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after)P8 afterTABLE_INCLINE | Table incline |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Safe Line Parameters
Parameter |
| Description |
| Comment |
---|
Distance to new scan table (crown) | mm | Distance to Crown Safe line before grinding from New scan table. | Calculated after the scan is bruted. | See the detailed description below. |
---|
Distance to plane table (crown) | mm | Distance to Crown Safe line after solution table is reached (that is, distance to Crown Safe line from solution table itself). |
---|
Distance to new scan table (pavilion) | mm | Distance to Pavilion Safe line before grinding from New scan table. |
---|
Distance to plane table (pavilion) | mm | Distance to Pavilion Safe line aftersolution table is reached (that is, distance to Pavilion Safe line from solution table itself). |
---|
Expand |
---|
title | Table allowance beforeDistance to new scan table (crown) |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
How much should we grind parallel to the solution table to reach it - measured before grinding started. Image Removed Calculation By finding the distance between Plane A and solution table, where: Distance to Crown Safe line before grinding from New scan table Note |
---|
Calculated after the scan is bruted. |
Image Added Calculation Calculated after the scan is bruted by finding the distance between New scan table and Crown Safe line ("line"), where: - New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
- Crown safe line is Crown Safe Line calculated for New scan table planePlane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.
Usage and Examples Information Distance to new scan table (crown) information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | mm | FACETING_SAFE_LINE_CROWN_BEFORE_NEW_TABLE_CUT_DEPTH | Table allowance | Distance to new scan table (Marking for Crown) |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Expand |
---|
title | Grind depthDistance to plane table (crown) |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. Image Removed Calculation By finding the distance between Plane A and New scan table, where: Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.New scan table is parallel to the solution table and goes:through the point of the scan table nearest to the solution table - if this nearest distance is positive (that is when fully grind the existing scan table, the solution is not touched);at the distance of 20 µm from the solution table - if this nearest distance is negative (that is when fully grind the existing scan table, the solution is broken); Distance to Crown Safe line aftersolution table is reached (that is, distance to Crown Safe line from solution table itself). Note |
---|
Calculated after the scan is bruted. |
Image Added Calculation Calculated after the scan is bruted by finding the distance between Crown safe plane ("line") and solution table, where: - Crown safe plane ("line") is Crown Safe Line calculated for plan table plane.
Formal definition: FACETING_SAFE_LINE_CROWN_AFTER_TABLE = CROWN_HEIGHT_MIN_MM Usage and Examples C8 reference line information through solution table itself - if the maximum distance between the initial scan table and solution table is less than 20 µm (and nearest negative). Image RemovedUsage and Examples Information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | mm | FACETING_SAFE_TABLELINE_CROWN_CUTAFTER_DEPTH | Table allowance | Distance to plane table (Marking for Crown) |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Expand |
---|
title | Table allowance parallelDistance to new scan table (pavilion) |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
Distance between the new scan table (the one used to set a stone on for bruting) and solution table. Image Removed Calculation to Pavilion Safe line before grinding from New scan table. Note |
---|
Calculated after the scan is bruted. |
Image Added Calculation Calculated after the scan is bruted by By finding the distance between the New scan table and solution table Pavilion safe plane ("line"), where: - New scan tablepositioning is described in the Grind depth parameter is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
- Pavilion safe line is Pavilion Safe Line calculated for New scan table plane.
Usage and Examples Information Distance to new scan table (pavilion) information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | mm | Status |
---|
colour | Red |
---|
title | Information will be provided soon |
---|
|
| NA | FACETING_SAFE_LINE_PAVILION_BEFORE_NEW_TABLE_MM | Distance to new scan table (Marking for Pavilion) |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
Expand |
---|
title | Table inclineDistance to plane table (pavilion) |
---|
|
Info |
---|
This parameter is applicable to the following cuts: All Cuttings |
Planned table tilt compared to the holder plane. Image Removed Calculation NA Usage and Examples Distance to Pavilion Safe line aftersolution table is reached (that is, distance to Pavilion Safe line from solution table itself). Note |
---|
Calculated after the scan is bruted. |
Image Added Calculation Calculated after the scan is bruted by finding the distance between Pavilion safe plane ("line") and solution table, where: - Pavilion safe line is Pavilion Safe Line calculated for Plan (solution) table plane.
Formal definition:
- Find the pavilion facet with the lowest height, let us say its number is F
- Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>
Usage and Examples Distance to plane table (pavilion) information Information is used during grinding. Reporting Reported in | Section | Values | Units | Bookmarks | Name in Reports |
---|
Print Label | NA | Single value | degmm | TABLE_INCLINE | Table inclineLINE_PAVILION_AFTER_TABLE
| Distance to plane table (Marking for Pavilion) |
---|
Visualization in Appraisers Value | Units | Bookmark | Tab | Parameter Name | Comment |
---|
NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
These parameters are presented in the Print Label report:
Image Added