The Print Label report contains reference line parameters:
Image Removed
Image Added
MeaningAdded to the Print Label report as...| Marking for Crown | С8 | C8 before | mm | The reference line for the crown main facets before table allowance. |
|---|
С8 Marking for Pavilion | See the detailed description below.
|
| C8 after | mm | The reference line for the crown main facets after table allowance. |
|---|
Marking for Crown | See description below | | P8 before | mm | The reference line for the pavilion main facets before table allowance. |
|---|
| P8 after | mm | The reference line for the pavilion main facets after table allowance. |
|---|
Marking for Pav | See description below | C8 bef - C8 after | See description below | Table tilt | Rot | | Table allowance | mm | Table allowance. |
|---|
| Table |
|---|
polishing, mm| deg. | Planned table tilt compared to the current table. |
|---|
Table polishing, deg. | See description below | 
Image Removed
Print Label example:
Image Added
| Expand |
|---|
| title | Marking for CrownC8 after |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: Brilliant |
Distance between the holder plane and C8 reference line after table allowance. 
Calculation FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM Usage and Examples C8 reference line information is used during polishing. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE | Marking for CrownC8 after |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
| Expand |
|---|
| title | Marking for PavP8 after |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: Brilliant |
Distance between the holder plane and P8 reference line after table allowance. 
Calculation - Find the pavilion facet with the highest height, let us say its number is F
- Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>
Usage and Examples P8 reference line information is used during polishing. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | FACETING_REFERENCE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after) | Marking for PavP8 after |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
| Expand |
|---|
| title | Table polishing, mmallowance |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: Brilliant |
Table allowance.  Image Removed Image Added
Calculation The maximum distance between perpendicular to the solution table plane and the facet of the current stone. Usage and Examples Information is used during polishing. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | | Table polishingallowance |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
| Expand |
|---|
| title | Table polishing, degincline |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: Brilliant |
Planned table tilt compared to the holder plane.  Image Removed Image Added
Calculation NA Usage and Examples Information is used during polishing. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
| Print Label |
| Single value | deg | FACETING_TABLE_INCLINE | Table polishingincline |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
