Table processing and reference line parameters are used during the polishing process:
| Table Processing Parameters |
|---|
Reference 
Image Removed Image Added
|
| Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table. |
C8 reference | Crown safe plane("line") - |
crown main facets reference plane.P8 reference | Crown Safe Line plane calculated for New scan table. |
| Pavilion safe plane ("line") - |
pavilion main facets reference plane| Pavilion Safe Line plane calculated for New scan table. |
| New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description). |
Table Processing Parameters
| Parameter |
| Description | Comment |
|---|
| Table allowance before | mm | How much should we grind parallel to the solution table to reach it - measured before grinding started. | See the detailed description below. |
|---|
| Grind depth | mm | How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. |
|---|
| Table allowance parallel | mm | Distance between new scan table and solution table. |
|---|
| Table incline | deg. | Planned table tilt compared to the current holder plane. |
|---|
| Expand |
|---|
| title | Table allowance before |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
How much should we grind parallel to the solution table to reach it - measured before grinding started. 
Calculation By finding the distance between Plane A and solution table, where: - Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.
Usage and Examples Information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | | Table allowance |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
...
| Expand |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. 
Calculation By finding the distance between Plane A and New scan table, where: - Plane A goes through the point of the scan table farthest from the solution table and is parallel to the solution table.
- New scan table is parallel to the solution table and goes:
- through the point of the scan table nearest to the solution table - if this nearest distance is positive (that is when fully grind the existing scan table, the solution is not touched);
at the distance of 20 µm from the solution table - if this nearest distance is negative (that is when fully grind the existing scan table, the solution is broken); through solution table itself - if the maximum distance between the initial scan table and solution table is less than 20 µm (and nearest negative).
Usage and Examples Information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | FACETING_TABLE_CUT_DEPTH_TO_WHITTLE_AWAY_EXISTING_MM
| Table allowance |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
...
| Expand |
|---|
| title | Table allowance parallel |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
Distance between the new scan table (the one used to set a stone on for bruting) and solution table. 
Calculation By finding the distance between the New scan table and solution table, where: - New scan table positioning is described in the Grind depth parameter.
Usage and Examples Information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | | Status |
|---|
| colour | Red |
|---|
title | Information will be provided soonFACETING_TABLE_ALLOWANCE_TO_WHITTLE_AWAY_EXISTING_MM | NA |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
...
| Expand |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
Planned table tilt compared to the holder plane. 
Calculation NA Usage and Examples Information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
| Print Label |
| Single value | deg | FACETING_TABLE_INCLINE | Table incline |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
...
Safe Line Parameters
| Parameter |
| Description |
| Comment |
|---|
| C8 beforeDistance to new scan table (crown) | mm | Distance to C8 reference Crown Safe line before grinding from New scan table. | Calculated after the scan is bruted. | See the detailed description below. |
|---|
| C8 afterDistance to plane table (crown) | mm | Distance to C8 reference Crown Safe line after solution table is reached (that is, distance to C8 reference Crown Safe line from solution table itself). |
|---|
| P8 beforeDistance to new scan table (pavilion) | mm | Distance to P8 reference Pavilion Safe line before grinding from New scan table. |
|---|
| P8 afterDistance to plane table (pavilion) | mm | Distance to P8 reference Pavilion Safe line aftersolution table is reached (that is, distance to P8 reference Pavilion Safe line from solution table itself). |
|---|
| Expand |
|---|
| title | C8 beforeDistance to new scan table (crown) |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
Distance to C8 reference Crown Safe line before grinding from New scan table. | Note |
|---|
Calculated after the scan is bruted. |
 Image Removed Image Added
Calculation Calculated after the scan is bruted by finding the distance between New scan table and C8 reference plane Crown Safe line ("line"), where: - New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
- C8 reference plane ("line") is a crown main facets reference Crown safe line is Crown Safe Line calculated for New scan table plane.
Usage and Examples C8 reference line Distance to new scan table (crown) information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | | Status |
|---|
| colour | Red |
|---|
| title | Information will be provided soon |
|---|
|
| C8 before | FACETING_SAFE_LINE_CROWN_BEFORE_NEW_TABLE_MM | Distance to new scan table (Marking for Crown) |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
| Expand |
|---|
| title | C8 afterDistance to plane table (crown) |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
Distance to C8 reference Crown Safe line aftersolution table is reached (that is, distance to C8 reference Crown Safe line from solution table itself). | Note |
|---|
Calculated after the scan is bruted. |
 Image Removed Image Added
Calculation Calculated after the scan is bruted by by finding the distance between C8 reference Crown safe plane ("line") and solution table, where: - C8 reference Crown safe plane ("line") is a crown main facets reference Crown Safe Line calculated for plan table plane.
Formal definition: FACETING_REFERENCESAFE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAXMIN_MM Usage and Examples C8 reference line information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | FACETING_REFERENCESAFE_LINE_CROWN_MAINS_AFTER_TABLE
| C8 afterDistance to plane table (Marking for Crown) |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
| Expand |
|---|
| title | P8 beforeDistance to new scan table (pavilion) |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
Distance to P8 reference Pavilion Safe line before grinding from New scan table. | Note |
|---|
Calculated after the scan is bruted. |
 Image Removed Image Added
Calculation Calculated after the scan is bruted by finding the distance between New scan table and P8 reference Pavilion safe plane ("line"), where: - New scan table is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).
- P8 reference plane ("line") is a pavilion main facets reference Pavilion safe line is Pavilion Safe Line calculated for New scan table plane.
Usage and Examples P8 reference line Distance to new scan table (pavilion) information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | | Status |
|---|
| colour | Red |
|---|
| title | Information will be provided soon |
|---|
|
| P8 before | FACETING_SAFE_LINE_PAVILION_BEFORE_NEW_TABLE_MM | Distance to new scan table (Marking for Pavilion) |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
| Expand |
|---|
| title | P8 afterDistance to plane table (pavilion) |
|---|
|
| Info |
|---|
| This parameter is applicable to the following cuts: All Cuttings |
Distance to P8 reference Pavilion Safe line aftersolution table is reached (that is, distance to P8 reference Pavilion Safe line from solution table itself). | Note |
|---|
Calculated after the scan is bruted. |
 Image Removed Image Added
Calculation Calculated after the scan is bruted by by finding the distance between P8 reference Pavilion safe plane ("line") and solution table, where: - P8 reference plane ("line") is a pavilion main facets reference Pavilion safe line is Pavilion Safe Line calculated for Plan (solution) table plane.
Formal definition:
- Find the pavilion facet with the highest lowest height, let us say its number is F
- Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>
Usage and Examples P8 reference line Distance to plane table (pavilion) information is used during grinding. Reporting | Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|
Print Label | NA | Single value | mm | FACETING_REFERENCESAFE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after
| Distance to plane table (Marking for Pavilion) | P8 after |
|---|
Visualization in Appraisers | Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
|
...
These parameters are presented in the Print Label report:
Image Removed
Image Added
