Versions Compared

Old Version 7

changes.mady.by.user Maxim Bashurov

Saved on

compared with

New Version Current

changes.mady.by.user Sergey Savrasov

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The "gold star" shows which Smart Recut preset of preset will be used for the active profile will be used  of the linked appraiser when running allocation for multiple cuts with for multiple cuts with a multi-diamond algorithm with + Smart Recut option. There is a default gold star for each profile of each appraiser working with Smart Recut. Thus, you can skip configuring gold stars - in this case, the default will be used (for MyRound profiles - preset №4preset №4, for MyOval and MyOvalPerformanceWare - №6, for MyAnyCut MyOval and MyOvalPerformanceWare - №6, for MyAnyCut and alike - №8 №8).

Notes on structure:

  • profiles belong to an appraiser, presets (not presented on diagram) belong to the profile
  • exception - SR presets belong directly to SR
  • thus: do not mix appraiser profile's presets with SR presets

Notes on usage:

  • If you marked this SR preset with a gold star for this profile, it does not say anything about other profiles.
  • When for the in-house cut you create its appraiser, its profiles are copied from the template, presets for them are copied from the "MyAnyCut" appraiser (first two profiles), and gold star is set to SR preset "8.AllWidened".

...

  1. Main parameters of a solution.
  2. Table processing parameters.
  3. Reference Safe line parameters.
  4. Image with the angles of the main facets on the pavilion.
  5. Image with the angles of the main facets on the crown.
  6. Image reflecting the process of polishing a table (angle 1).
  7. Image reflecting the process of polishing a table (angle 2).

...

  • Poing of touch by polishing disc
  • Positions of different planes related to polishing
  • Door azimuth
  • The azimuth of the table polishing start point.
  • The Grind depth table processing parameter (see description here).




The report includes the Rotate Table processing start azimuth to door control (active if the hardware is connected).

...