Page History

...

Connect your graphics card of the PC to Samsung 3D TV by HDMI cable (if it’s necessary use HDMI-to-DVI or HDMI-to-DisplayPort adapters). Please make your TV as primary display.

Installing software

1. Please install latest drivers for your NVIDIA product. You can download it from here, by selecting your model of the graphics card from list: http://www.nvidia.com/Download/index.aspx?lang=en-us;

Enable stereoscopic 3D

2. Download and Install latest version of the OctoNus Stereo Viewer.

 Settings in the NVIDIA Control Panel 

1. .

NVIDIA Control Panel > Stereoscopic 3D > Set Up Stereoscopic 3D, set Enable Stereoscopic 3D check, and press Apply button. 

 Image Removed


  If after that the Setup Wizard has been started, follow the step by step instructions of the wizard.

  If you have 3DTV Play software installed on your computer, the configuration window will look like this:

   Image Removed 

  Otherwise it will be as follows:

   Image Removed


 Note: If you want, you can buy NVIDIA 3DTV Play for $39.99 here, but it's not necessary. But usase of 3DTV Play software will provide better quality of the stereo image (higher resolution).

 

2. Change display resolution and refresh rate. NVIDIA Control Panel > Display > Change Resolution, select the maximum supported resolution on the HD 3D list (usually 1920x1080 – Full HD) and the maximum supported refresh rate for this screen resolution (Refresh Rate list).

   Image Removed  

Settings in the OctoNus Stereo Viewer

...