The Print Label report contains reference line parameters:
| Parameter | Description | Comment | |
|---|---|---|---|
| Marking for Crown - C8 before | mm | The reference line for the crown main facets before table allowance. | See the detailed description below. |
| Marking for Crown - C8 after | mm | The reference line for the crown main facets after table allowance. | |
| Marking for Pav - P8 after | mm | The reference line for the pavilion main facets before table allowance. | |
| Marking for Pav - P8 after | mm | The reference line for the pavilion main facets after table allowance. | |
| Table allowance | mm | Table allowance. | |
| Incline | deg. | Planned table tilt compared to the current table. |
Print Label example:
Distance between the holder plane and C8 reference line after table allowance.
Calculation
FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE = CROWN_HEIGHT_MAX_MM
Usage and Examples
C8 reference line information is used during polishing.
Reporting
| Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|---|---|---|---|---|
Print Label | NA | Single value | mm | FACETING_REFERENCE_LINE_CROWN_MAINS_AFTER_TABLE | Marking for Crown |
Visualization in Appraisers
| Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|---|---|---|---|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
Distance between the holder plane and P8 reference line after table allowance.
Calculation
- Find the pavilion facet with the highest height, let us say its number is F
- Marking for Pav, mm = CROWN_HEIGHT_MM_<F> + GIRDLE_WIDE_BEZEL_MM_<F>
Usage and Examples
P8 reference line information is used during polishing.
Reporting
| Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|---|---|---|---|---|
Print Label | NA | Single value | mm | FACETING_REFERENCE_LINE_PAVILION_MAINS_AFTER_TABLE (P8 after) | Marking for Pav |
Visualization in Appraisers
| Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|---|---|---|---|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
Table allowance.
Calculation
The maximum distance between perpendicular to the solution table plane and the facet of the current stone.
Usage and Examples
Information is used during polishing.
Reporting
| Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|---|---|---|---|---|
Print Label | NA | Single value | mm | FACETING_TABLE_CUT_DEPTH | Table polishing |
Visualization in Appraisers
| Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|---|---|---|---|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |
Planned table tilt compared to the holder plane.
Calculation
NA
Usage and Examples
Information is used during polishing.
Reporting
| Reported in | Section | Values | Units | Bookmarks | Name in Reports |
|---|---|---|---|---|---|
| Print Label | Single value | deg | FACETING_TABLE_INCLINE | Table polishing |
Visualization in Appraisers
| Value | Units | Bookmark | Tab | Parameter Name | Comment |
|---|---|---|---|---|---|
| NA | NA | NA | NA | NA | Not presented in any appraiser. |