The "MyAnyCutOpt | MyAnyCut" composite appraiser combines relative and absolute appraisal of the created solutions so that if you are aiming to get some grade, both absolute and relative parts should have at least this grade, which means the algorithms will be searching within the intersection of the relative and absolute values.
On the figure: 1. Relative part, 2. Absolute part.
Three modes are available:
To switch between modes, use the control to the right of the composite appraiser name:
|
In Relative appraiser:
Wrong values are highlighted with red. On editing finish, the wrong value is automatically substituted with the nearest correct (0,01 or -0,01).
Latest on top.
The "MyAnyCutOpt | MyAnyCutRelatve" appraiser (also known as AnyCut relative appraiser or relative appraiser) allows performing allocation for any ASCII-cuttings uploaded to the system. The appraiser estimates some parameters value difference between the current and a reference model. The reference model is considered to be the good one and the relative appraiser estimates if the current model parameters are in the allowable range comparing to the reference one. The relative appraiser is an important part of the AnyCut Workflow and is necessary for working with the client cuttings.
The relative appraiser supports Fix Girdle, Fix Crown and Fix Facets options of the Smart Recut algorithms.
In previous versions, the name of the algorithm was "TestRelativeAscii | MyRelativeAscii".