System topology for MBox 2.0, MBox 1.5
Cabling
Ethernet
Use UTP Cat5E factory-made cables of appropriate length.
USB
Use USB Type A male (PC side) / USB Type B male (device side) cables, approx. 2 meters length.
Endpoints configuration
Endpoint | Group | MicroscopeDrivers.ini table | Configuration software |
---|---|---|---|
Prosilica left adapter | PC | Open Control Panel\Network and Internet\Network Connections, configure each adapter's TCP/IP V4 properties | |
Prosilica right adapter | PC | ||
Devices adapter | PC | ||
Prosilica left camera | MBox | Device= Photo Microscope | Run GigEIPConfig, configure IP addresses Run GigEViewer to find each adapter's UniqueId |
Prosilica right camera | MBox | Device= Photo Microscope | |
DM_ENG motor board | MBox | Table: Motors | Download folder dm_eng, edit network.info, lines for |
DM_LHT light board | Light box | Table: FrontLight For rear light: Table: RearLight For diffuse light: Table: DiffuseLight | Download folder dm_lht, edit network_lt.info, lines for For single board: line For multiple boards: Every board should be configured separately, with distinct IP, disconnecting another board. Record configured IP address to the |