Install necessary software for hardware
Install HASP driver
The DM Multilight Application is protected by a HASP key (DM Gold), so you have to install HASP drivers from official site.
On this page we need to download Sentinel HASP/LDK - Windows GUI Run-time Installer.
After installation, please, plug-in the HASP key to any USB-port. You need to plug-in the following key (the ID could be another) and wait until Windows OS will detect it:
Supporting XIMEA camera
- Install "Ximea Windows Software Package Stable" either from official site from the section "Installation guidelines > download".
- Run "XIMEA CamTool" to check the camera.
- If it is properly connected and detected, you'll see that next selected buttons are active:
Press on the left of selected buttons to check a stream from the camera. - If these buttons are inactive, try to connect the camera to another USB3 port of the computer.
- Close XIMEA Cam tool program
Supporting Multilight controller
It is necessary to setup static IP address at Ethernet connection to Multilight controller:
- Open "Windows Settings" (in Windows 10).
- Press on the "Network & Internet" item.
- On the left panel press on the "Ethernet" tab.
- On the right panel press on "Change adapter options"
- Find connection to the Multilight controller in the connection list:
One way to do this is to double click on each connection and determine by network traffic connection to Internet. Another available connection is the connection to Multilight controller (Ethernet 2 on the picture above). - Double click on the connection to Multilight controller and press on the "Properties" button.
- Select the item "Internet Protocol Version 4 (TCP/IPv4) by mouse and press on the "Properties" button.
- Choose "Use the following IP address" option and write IP address 192.168.0.1 and subnet mask: 255.255.255.0:
- Press on the "OK" button".
Install NVIDIA graphics driver
We recommend to install latest available graphics driver for NVIDIA card from official NVIDIA site.
The minimum driver version supported: 461.09
Install program
Install DM-Multilight program and launch it.
Autostereoscopic display
Please, follow Setup autostereoscopic display instructions.