HPOxygen measures offsets as the distances between the projections of the centers (those of table, girdle, and culet) onto the table plane.
From | To | Name in MyAppraiser | Name in the Full report |
---|---|---|---|
Girdle | Table | Table Offset | Girdle-Table offset by table axis |
Girdle | Culet | Culet Offset | Girdle-Culet offset by table axis |
Table | Culet | Table Culet Offset | Table-Culet offset by table axis |
Illustrations of crown view and pavilion view have images of table center, girdle center, and culet center for visualization of the parameters described above.
Diameter of circle on image Girdle center equals 2% from average stone diameter to visual estimation of symmetry and distance between table, girdle and culet centers.
Estimation of Girdle, Table and Culet centers for different cuts
Brilliant
- Girdle center: center of maximum inscribed circle (MIC)
- Table center: table center of mass
- Culet center:
- if culet has facets, then culet center is its center of mass
- else culet center is the point of maximum height.
Rounded Fancies
- Girdle center: first create a perpendicular to the center of maximum diameter. The center of the parallel to the perpendicular diameter is girdle center.
- Table center: table center of mass
- Culet center:
- if culet has facets, then culet center is its center of mass
- else culet center is the point of maximum height.
Rectangular Fancies
- Girdle center: at the intersection of diagonals
- Table center: table center of mass
- Culet center:
- if culet has facets, then culet center is its center of mass
- else culet center is the point of maximum height.
StepCuts
- Girdle center: at the intersection of diagonals from opposite corners. First diagonal is maximum diameter. Second is the vertical mirror symmetry to first diagonal.
- Table center: table center of mass
- Culet center:
- if there is a culet segment with lengthening 1.1, culet center is the segment center
- else if culet has facets, then culet center is its center of mass
- else culet center is the point of maximum height.
StepCuts / Triangle
- Girdle center: center of maximum inscribed circle (MIC)
- Table center: table center of mass
- Culet center:
- if culet has facets, then culet center is its center of mass
- else culet center is the point of maximum height.
Unknown cuts
- Girdle center: girdle center of mass
- Table center: table center of mass
- Culet center:
- if there is a big segment includes point near maximum height point and slope less then 5 degree, culet center is the segment center
- else if culet has facets, then culet center is its center of mass
- else culet center is the point of maximum height.
Reporting
The offsets are reported together with corresponding errors. Additionally, for the non-round cuts the components of the offsets in the direction of width and length are reported.
Reported in | Section | Values | Units | Bookmarks |
---|---|---|---|---|
All full reports |
Detailed Parameters
| Girdle-Culet offset ± error |
|
|
Girdle-Table offset ± error | OFFSET_GIRDLE_TABLE_PC, OFFSET_ERROR_GIRDLE_TABLE_PC, OFFSET_GIRDLE_TABLE_MM, OFFSET_ERROR_GIRDLE_TABLE_MM, GIRDLE_TABLE_OFFSET_SYM | |||
Culet-Table offset ± error | OFFSET_TABLE_CULET_PC, OFFSET_ERROR_TABLE_CULET_PC, OFFSET_TABLE_CULET_MM, OFFSET_ERROR_TABLE_CULET_MM, TABLE_CULET_OFFSET_SYM | |||
Girdle to table-culet line offset | %(diameter) and mm | OFFSET_GIRDLE_TABLE_CULET_LINE_PC, OFFSET_GIRDLE_TABLE_CULET_LINE_MM | ||
Full report for Rounded Fancies, |
Detailed Parameters | Girdle-Culet offset widthwise |
%(diameter) and mm | OFFSETX_ OFFSETX_ |
Girdle-Culet offset lengthwise | OFFSETY_ OFFSETY_ | |||
Girdle-Table offset widthwise | OFFSETX_ OFFSETX_ | |||
Girdle-Table offset lengthwise | OFFSETY_ OFFSETY_ | |||
Culet-Table offset widthwise | OFFSETX_TABLE_CULET_PC, OFFSETX_TABLE_CULET_MM | |||
Culet-Table offset lengthwise | OFFSETY_TABLE_CULET_PC, OFFSETY_TABLE_CULET_MM |
Add Comment