...
Save results (Save to.. button) and send us obtained the file. Also, send us config.xml.
DOP Calibration Data
"Add DOP 0+" button - for adding reference zero position
"Remove last 0+" button - removing last reference zero position
"Reset 0+" button - clearing 0+ history
Gliffy Diagram | ||||||
---|---|---|---|---|---|---|
|
DOP Ellipse
Gliffy Diagram | ||||
---|---|---|---|---|
|
Gliffy Diagram | ||||
---|---|---|---|---|
|
DOP calibration data is built by 4 points, obtained at different angles. When all points collected, there will be a calibration ellipse drawn on the image. It has 4 points marked with crosses, the bigger cross is at "6h" position. Also there will be a dark-green cross, which marks average zero offset (0+). Ellipse parameters are shown in the text box: center coordinates, main diameters values, and the maximum deviation of the current zero offset from ellipse points.
You can always change current zero offset to one of these points: ellipse center and zero offset (0+) by pressing the corresponding button in the DOP calibration area: