In Rounded fancies, the bezel facets and main pavilion facets are further classified into the following subtypes: Head, Shoulder, Curve, Wing, and Point. Slope angles, azimuth angles, and heights are reported independently for each subtype.
Definition
The facets are assigned as shown on the figures below. In total, this amounts to the following numbers of each subtype per cut:
| | Marquise | Oval | Pear | Heart |
|---|
| | Crown |
|---|
| Head | – | – | 3 | 2 |
|---|
| Shoulder | – | – | – | 2 |
|---|
| Curve | 2 | 2 | 2 | 2 |
|---|
| Wing | 4 | 4 | 2 | 2 |
|---|
| Point | 2 | 2 | 1 | 1 |
|---|
| | Pavilion |
|---|
| Head | – | – | 3 | – |
|---|
| Shoulder | – | – | – | 2 |
|---|
| Curve | 2 | 2 | 2 | 2 |
|---|
| Wing | 4 | 4 | 2 | 2 |
|---|
| Point | – | 2 | – | – |
|---|
Marquise
Oval
Pear
Heart
General remarks
Note that in the particular cases there may be different numbers of facets of each subtype. Besides the non-ideal cuts and semicuts, there may be variations of the canonical cuts. Consider, for example, the non-standard Oval (elongated in bone direction, rather than bezel) with four Curve facets both in pavilion and in crown, but no Point facets at all.
Note, moreover, that the numbering sequence of facets in the report does not necessarily coincide with that on the sample pictures above.
Reporting
Since the same report template is used for all Rounded fancies, the placeholders for individual values are determined according to the maximum possible number of facets of each subtype. The unused placeholders appear in the reports as N/A.
Crown slope angles
| Reported in | Section | Values | Units | Bookmarks |
|---|
Full Report for Rounded Fancies |
Main Parameters
|
Avg, Min, Max, Dev
|
°
| CROWN_FANCY_HEAD_ANGLE_DEG, CROWN_FANCY_HEAD_ANGLE_DEG_MIN, CROWN_FANCY_HEAD_ANGLE_DEG_MAX, CROWN_FANCY_HEAD_ANGLE_DEG_DEV,
CROWN_FANCY_SHOULDER_ANGLE_DEG, CROWN_FANCY_SHOULDERCROWN_FANCY_SHOULDERCROWN_FANCY_SHOULDER
CROWN_FANCY_CURVE_ANGLE_DEG, CROWN_FANCY_CURVECROWN_FANCY_CURVECROWN_FANCY_CURVE
CROWN_FANCY_WING_ANGLE_DEG, CROWN_FANCY_WINGCROWN_FANCY_WINGCROWN_FANCY_WING
CROWN_FANCY_POINT_ANGLE_DEG, CROWN_FANCY_POINTCROWN_FANCY_POINTCROWN_FANCY_POINT
|
|---|
Detailed Parameters
|
All values
|
°
| CROWN_FANCY_HEAD_ANGLE_DEG_1..CROWN_FANCY_HEAD_ANGLE_DEG_3,
CROWN_FANCY_SHOULDER_ANGLE_DEG_1..CROWN_FANCY_SHOULDER
CROWN_FANCY_CURVE_ANGLE_DEG_1..CROWN_FANCY_CURVE
CROWN_FANCY_WING_ANGLE_DEG_1..CROWN_FANCY_WING
CROWN_FANCY_POINT_ANGLE_DEG_1..CROWN_FANCY_POINT
|
Crown azimuths
| Reported in | Section | Values | Units | Bookmarks |
|---|
Full Report for Rounded Fancies
|
Detailed Parameters
|
All values
|
°
| CROWN_FANCY_HEAD_AZIMUTH_DEG_1..CROWN_FANCY_HEAD_AZIMUTH_DEG_3,
CROWN_FANCY_SHOULDER_AZIMUTH_DEG_1..CROWN_FANCY_SHOULDER
CROWN_FANCY_CURVE_AZIMUTH_DEG_1..CROWN_FANCY_CURVE
CROWN_FANCY_WING_AZIMUTH_DEG_1..CROWN_FANCY_WING
CROWN_FANCY_POINT_AZIMUTH_DEG_1..CROWN_FANCY_POINT |
|---|
Crown heights
| Reported in | Section | Values | Units | Bookmarks |
|---|
Full Report for Rounded Fancies | Main Parameters | Avg, Min, Max, Dev | % and mm | CROWN_FANCY_HEAD_HEIGHT_PC, CROWN_FANCY_HEAD_HEIGHT_PC_MIN, CROWN_FANCY_HEAD_HEIGHT_PC_MAX, CROWN_FANCY_HEAD_HEIGHT_PC_DEV,
CROWN_FANCY_HEAD_HEIGHT_MM, CROWN_FANCY_HEAD_HEIGHT_MM_MIN, CROWN_FANCY_HEAD_HEIGHT_MM_MAX, CROWN_FANCY_HEAD_HEIGHT_MM_DEV,
CROWN_FANCY_SHOULDER_HEIGHT_PC, CROWN_FANCY_SHOULDERCROWN_FANCY_SHOULDERCROWN_FANCY_SHOULDER
CROWN_FANCY_SHOULDER_HEIGHT_MM, CROWN_FANCY_SHOULDERCROWN_FANCY_SHOULDERCROWN_FANCY_SHOULDER
CROWN_FANCY_CURVE_HEIGHT_PC, CROWN_FANCY_CURVECROWN_FANCY_CURVECROWN_FANCY_CURVE
CROWN_FANCY_CURVE_HEIGHT_MM, CROWN_FANCY_CURVECROWN_FANCY_CURVECROWN_FANCY_CURVE
CROWN_FANCY_WING_HEIGHT_PC, CROWN_FANCY_WINGCROWN_FANCY_WINGCROWN_FANCY_WING
CROWN_FANCY_WING_HEIGHT_MM, CROWN_FANCY_WINGCROWN_FANCY_WINGCROWN_FANCY_WING
CROWN_FANCY_POINT_HEIGHT_PC, CROWN_FANCY_POINTCROWN_FANCY_POINTCROWN_FANCY_POINT
CROWN_FANCY_POINT_HEIGHT_MM, CROWN_FANCY_POINTCROWN_FANCY_POINTCROWN_FANCY_POINT
|
|---|
Detailed Parameters | All values | % and mm | CROWN_FANCY_HEAD_HEIGHT_PC_1..CROWN_FANCY_HEAD_HEIGHT_PC_3,
CROWN_FANCY_HEAD_HEIGHT_MM_1..CROWN_FANCY_HEAD_HEIGHT_MM_3,
CROWN_FANCY_SHOULDER_HEIGHT_PC_1..CROWN_FANCY_SHOULDER
CROWN_FANCY_SHOULDER_HEIGHT_MM_1..CROWN_FANCY_SHOULDER
CROWN_FANCY_CURVE_HEIGHT_PC_1..CROWN_FANCY_CURVE
CROWN_FANCY_CURVE_HEIGHT_MM_1..CROWN_FANCY_CURVE
CROWN_FANCY_WING_HEIGHT_PC_1..CROWN_FANCY_WING
CROWN_FANCY_WING_HEIGHT_MM_1..CROWN_FANCY_WING
CROWN_FANCY_POINT_HEIGHT_PC_1..CROWN_FANCY_POINT
CROWN_FANCY_POINT_HEIGHT_MM_1CROWN_FANCY_POINT
|
Pavilion slope angles
| Reported in | Section | Values | Units | Bookmarks |
|---|
Full Report for Rounded Fancies |
Main Parameters
|
Avg, Min, Max, Dev
|
°
| PAVILION_FANCY_HEAD_ANGLE_DEG,
PAVILION_FANCY_HEAD_ANGLE_DEG_MIN, PAVILION_FANCY_HEAD_ANGLE_DEG_MAX,
PAVILION_FANCY_HEAD_ANGLE_DEG_DEV,
PAVILION_FANCY_SHOULDER_ANGLE_DEG, PAVILION_FANCY_SHOULDERSHOULDERSHOULDER,
PAVILION_FANCY_CURVE_ANGLE_DEG, PAVILION_FANCY_CURVECURVECURVE
PAVILION_FANCY_WING_ANGLE_DEG, PAVILION_FANCY_WINGWINGWING
PAVILION_FANCY_POINT_ANGLE_DEG, PAVILION_FANCY_POINTPOINTPOINT |
|---|
Detailed Parameters | All values | ° | PAVILION_FANCY_HEAD_ANGLE_DEG_1..PAVILION_FANCY_HEAD_ANGLE_DEG_3,
PAVILION_FANCY_SHOULDER_ANGLE_DEG_1..PAVILION_FANCY_SHOULDER,
PAVILION_FANCY_CURVE_ANGLE_DEG_1..PAVILION_FANCY_CURVE
PAVILION_FANCY_WING_ANGLE_DEG_1..PAVILION_FANCY_WING
PAVILION_FANCY_POINT_ANGLE_DEG_1..PAVILION_FANCY_POINT |
Pavilion azimuths
| Reported in | Section | Values | Units | Bookmarks |
|---|
Full Report for Rounded Fancies | Detailed Parameters | All values | ° | PAVILION_FANCY_HEAD_AZIMUTH_DEG_1..PAVILION_FANCY_HEAD_AZIMUTH_DEG_3,
PAVILION_FANCY_SHOULDER_AZIMUTH_DEG_1..PAVILION_FANCY_SHOULDER,
PAVILION_FANCY_CURVE_AZIMUTH_DEG_1..PAVILION_FANCY_CURVE
PAVILION_FANCY_WING_AZIMUTH_DEG_1..PAVILION_FANCY_WING
PAVILION_FANCY_POINT_AZIMUTH_DEG_1..PAVILION_FANCY_POINT |
|---|
Pavilion heights
| Reported in | Section | Values | Units | Bookmarks |
|---|
Full Report for Rounded Fancies | Main Parameters | Avg, Min, Max, Dev | % and mm | PAVILION_FANCY_HEAD_HEIGHT_PC,
PAVILION_FANCY_HEAD_HEIGHT_PC_MIN, PAVILION_FANCY_HEAD_HEIGHT_PC_MAX,
PAVILION_FANCY_HEAD_HEIGHT_PC_DEV,
PAVILION_FANCY_HEAD_HEIGHT_MM,
PAVILION_FANCY_HEAD_HEIGHT_MM_MIN, PAVILION_FANCY_HEAD_HEIGHT_MM_MAX,
PAVILION_FANCY_HEAD_HEIGHT_MM_DEV,
PAVILION_FANCY_SHOULDER_HEIGHT_PC, PAVILION_FANCY_SHOULDERSHOULDERSHOULDER,
PAVILION_FANCY_SHOULDER_HEIGHT_MM, PAVILION_FANCY_SHOULDERSHOULDERSHOULDER,
PAVILION_FANCY_CURVE_HEIGHT_PC, PAVILION_FANCY_CURVECURVECURVE
PAVILION_FANCY_CURVE_HEIGHT_MM, PAVILION_FANCY_CURVECURVECURVE
PAVILION_FANCY_WING_HEIGHT_PC, PAVILION_FANCY_WINGWINGWING
PAVILION_FANCY_WING_HEIGHT_MM, PAVILION_FANCY_WINGWINGWING
PAVILION_FANCY_POINT_HEIGHT_PC, PAVILION_FANCY_POINTPOINTPOINT
PAVILION_FANCY_POINT_HEIGHT_MM, PAVILION_FANCY_POINTPOINTPOINT
|
|---|
Detailed Parameters | All values | % and mm | PAVILION_FANCY_HEAD_HEIGHT_PC_1..
PAVILION_FANCY_HEAD_HEIGHT_MM_1
PAVILION_FANCY_SHOULDER_HEIGHT_PC_1..SHOULDER,
PAVILION_FANCY_SHOULDER_HEIGHT_MM_1SHOULDER,
PAVILION_FANCY_CURVE_HEIGHT_PC_1CURVE
PAVILION_FANCY_CURVE_HEIGHT_MM_1CURVE
PAVILION_FANCY_WING_HEIGHT_PC_1WING
PAVILION_FANCY_WING_HEIGHT_MM_1WING
PAVILION_FANCY_POINT_HEIGHT_PC_1POINT
PAVILION_FANCY_POINT_HEIGHT_MM_1POINT
|
Add Comment