The Print Label report contains reference line parameters:
C8 reference plane ("line") | Crown main facets reference plane. |
P8 reference plane ("line") | Pavilion main facets reference plane. |
Plane A | Goes through the point of the scan table farthest from the solution table and is parallel to the solution table. |
New scan table | Is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description). |
Parameter | Description | Comment | ||
---|---|---|---|---|
C8 before | mm | Distance to C8 reference line before grinding from New scan table. | Calculated after the scan is bruted. | See the detailed description below. |
C8 after | mm | Distance to C8 reference line after solution table is reached (that is, distance to C8 reference line from solution table itself). | ||
P8 before | mm | Distance to P8 reference line before grinding from New scan table. | ||
P8 after | mm | Distance to P8 reference line after solution table is reached (that is, distance to P8 reference line from solution table itself). | ||
Table allowance before | mm | How much should we grind parallel to the solution table to reach it - measured before grinding started. | ||
Grind depth | mm | How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting. | ||
Table allowance parallel | mm | Distance between new scan table and solution table. | ||
Table incline | deg. | Planned table tilt compared to the current holder plane. |
Print Label example: