Table processing and reference line parameters are used during the polishing process:

Table Processing Parameters	Safe Line Parameters

*Plane A* goes through the point of the scan table farthest from the solution table and is parallel to the solution table.	*Crown safe plane* ("line") - Crown Safe Line plane calculated for New scan table.
	*Pavilion safe plane* ("line") - Pavilion Safe Line plane calculated for New scan table.
*New scan table* is parallel to the solution table and positioned differently depending on conditions (see Grind depth calculation in the detailed description).

On this page:

Table Processing Parameters

Parameter		Description	Comment
Table allowance before	mm	How much should we grind parallel to the solution table to reach it - measured before grinding started.	See the detailed description below.
Grind depth	mm	How much should we grind parallel to the solution table to reach a new scan table - the one used to set a stone on for bruting.
Table allowance parallel	mm	Distance between new scan table and solution table.
Table incline	deg.	Planned table tilt compared to the current holder plane.

Safe Line Parameters

Parameter		Description		Comment
Distance to new scan table (crown)	mm	Distance to Crown Safe line before grinding from New scan table.	Calculated after the scan is bruted.	See the detailed description below.
Distance to plane table (crown)	mm	Distance to Crown Safe line after solution table is reached (that is, distance to Crown Safe line from solution table itself).
Distance to new scan table (pavilion)	mm	Distance to Pavilion Safe line before grinding from New scan table.
Distance to plane table (pavilion)	mm	Distance to Pavilion Safe line after solution table is reached (that is, distance to Pavilion Safe line from solution table itself).

These parameters are presented in the Print Label report: