You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

When connecting your NVIDIA GeForce graphics card to 3D TV at the first time

Step-by-step guide

Connecting hardware

Connect your graphics card of the PC to 3D TV by HDMI cable (if it’s necessary use HDMI-to-DVI or HDMI-to-DisplayPort adapters). Please make your TV as primary display.

  

Installing software

  1. Download and Install latest version of the OctoNus Stereo Viewer.

Settings in the OctoNus Stereo Viewer

  1. Set on PC graphics card maximum supported resolution by 3D TV.
     
  2. Run the OSV, open a stereo movie and check player settings
    1. Set frame rate to desired FPS (usually 15 or 20 fps);
    2. Set Round check for looped playback;
    3. Set the split type (for Digital Microscope stereo movies use Side by Side (Left First));
    4. Set "Interlaced" stereo mode;
    5. Press movie play button.
    6. Press 'Stereo' button.

If you did everything correctly, you’ll see interlaced stereo inside OSV like this:

You should set 'Interlaced' split type on your 3D Smart TV by 3D Mode button.

If you see that in stereo mode movie frames are inverted, try to check 'Swap Left/Right frames' as it shown on 'g' label on the screenshot above or swap left and right frames using your 3D TV settings.

  

  • No labels