From: Sergey Savrasov [mailto:savrasov@octonus.com]
Sent: Tuesday, July 14, 2015 4:55 PM
To: 'Utpal Mistry'; 'Janak'; 'nilesh'; 'Kamal@Lexus-Com. Com'
Cc: 'Sergey Sivovolenko'
Subject: Helium Polish version 5.6.76.1, report.dll version 2.6.10.1, dx.dll version 5.8.0.0, PacorHWS.dll version 4.0.33.0, OHWS_Reflect2.dll version 1.5.54.517, new templates dd 13.07.2015
Dear Nilesh, Utpal, Janak, Kamal,
Please find new version of Helium Polish version 5.6.76.1 and corresponding DLL’s and new report templates here:
2015_07_14_HeliumPolish_5.6.76.1.zip in \Dropbox (OctoNus)\Download\HP
Actual folder is \Dropbox (OctoNus)\Download\HP\HP_Actual_8.5D
Direct link to download is www.octonus.com/savr/2015_07_14_HeliumPolish_5.6.76.1.zip
In this version we made following changes:
- Support of new CUB HP_SMC for HPP software. So you will be able to make calibration and alignment of HPReflect scanner (shadow stage) initially with HP_SMC board not changing HP old CUB to HP_SMC. Please note that it is necessary to place OHWS_Reflect2.dll version 1.5.54.517 or later in root folder of HPP to work with HP_SMC board.
- Criteria to differentiate a Cushion from Oval is implemented on the base of GIA rule (E-mail from Janak with Subj: Re: Oval measured as marquise of 05.06.2015)
- Criteria to differentiate a StepCut from Radiant is changed. Now samples in E-mail from Utpal with Subj: FW: HeliumPolish 5.6.70.1 update feedback of 02.06.2015 (Dropbox\Requests\Heliumpolish\2015_05_30_stepcut_emerald_query) have correct reports. Before problem was that models was built by AnyCut algorithm and determined as Radiant but not StepCut. Since this version models determined as StepCut.
- Calculation of Table for Oval, Marquise, Pear and Cushion is changed (E-mail from Janak with Subj: Table width measurement for special OVAL of 20.06.2015) – please refer to bookmarks: TABLE_MM_X, TABLE_PC_X, WIDTH_TABLE_MM, WIDTH_TABLE_PC, LENGTH_TABLE_MM, LENGTH_TABLE_PC.
For sample from Janak’s mail:
- Illustrated HTML report for Cushion, AnyCut, Princess as it was few months ago for RBC:
- Changes in algorithm of facets determination of RBC. This allows to fix many problem samples with wrong determination, including sample from point 2 in E-mail from Nilesh of 09.05.2015 with Subj: RE: Helium Polish version 5.6.70.1, report.dll version 2.6.2.1, new templates dd 29.04.2015.
Please test this version firstly in Lexus and if it passes tests distribute among clients including GIA.
If you have any questions please don’t hesitate to ask me.
Best regards, Sergey.