- Download and install the StereoMovieViewer.exe file;
- Start the software:
- Press the Open button
to open an FLM movie or a series of photos in the BMP or JPG format;
- Select a movie (FLM) or series of photos (JPG, BMP);
- Press the Open button;
- Change the Split Type in this dialog and then press OK;
- The requested movie appears, as a result:
- Press the Play button
to start the movie; - To switch on/off the stereo mode, press button
; - To activate the fullscreen mode, press button
; - To exit the fullscreen mode press Esc;
- To adjust settings, stop playing the movie and press button
; - The Settings dialog box will appear, as a result:
- Set the Frames Rate (fps);
- Check the Round checkbox to loop the movie;
- Select the Stereo Mode:
- Anaglyph (Red/Blue) - for red-blue stereo glasses;
- Passive (Polarized) - for interlaced polarized stereo glasses;
- Active (Shutter) - for NVIDIA 3D Vision stereo glasses.
- Select the Split Type:
- Side by Side (Left first)
- Side by Side (Left first)
With this split type, the initial frame is split by a vertical line into two images intended for the left and the right eye, respectively. This is a widespread content type.
- Frame Shift (Left first)
- Frame Shift (Left first)
With this split type, the images for the left and the right eye produce a stream of somewhat shifted frames. This split type is suitable for movies with rotating objects.
- Over / Under (Left top)
- Over / Under (Left top)
With this split type, the initial frame is split by a horizontal line into two images intended for the left and the right eye, respectively. This is a rare content type.
For comfort stereo viewing:
In the Side by Side mode, adjust Frame Distance or use recommended value.
In the Frame Shift mode, adjust Frame Distance and Frame Shift or use recommended values:
Note. To change the parameter values, use the mouse or the left and the right arrow keys of the keyboard.
- If your movie is played too slow, select Style ➧ File in the Settings dialog box:
