System topology
Endpoints configuration
Endpoint | Group | MicroscopeDrivers.ini table | Configuration software |
---|---|---|---|
Prosilica left adapter | PC | Open Control Panel\Network and Internet\Network Connections, configure each adapter's TCP/IP V4 properties | |
Prosilica right adapter | PC | ||
Devices adapter | PC | ||
Prosilica left camera | MBox | Device= Photo Microscope | Run GigEIPConfig, configure IP addresses Run GigEViewer to find each adapter's UniqueId |
Prosilica right camera | MBox | Device= Photo Microscope | |
DM_ENG motor board | MBox | Table: MBox5axisBoard | Open folder dm_eng, edit network.info then run testmb5l.exe |
DM_LHT light board | Light box | Table: MBox48LightBoard For second board: Table: MBox48LightBoard2 | Open folder dm_lht, edit network.info then run testmblt.exe For single board: line For multiple boards: Every board should be configured separately, with distinct IP, disconnecting another board. Record configured IP address to the |