MyAppraiser considers multiple geometric parameters of a stone. Some parameters are defined only for specific cutting types, and some are universal.
Cut parameters
Name | Link to the description |
---|---|
Table | Table and Table Symm |
GirdleRatio (specific to Oval) | Girdle Ratio |
SquareDeviation (specific to Oval) | Square Deviation |
CrownAngle | Facets' slopes and azimuth angles |
PavilionAngle | |
StarLength | Star Length and Star Length Symm |
LowerGirdleLength | Lower Girdle Length and Lower Girdle Length Symm |
GirdleBezel | |
GirdleValley | |
CrownHeight | Crown Height and Crown Height Symm |
PavilionHeight | Pavilion depth |
TotalHeight | Total height |
Culet | Culet |
CrownPainting |
|
PavilionPainting | |
SumPainting | |
GirdleAngleMax | Girdle Angle Max |
HeightGirdleExtraFacet |
|
GirdleCrownExtraFacet | |
GirdlePavilionExtraFacet | |
GirdleExtraFacets |
Symmetry parameters
Unless specified otherwise, symmetry parameter is just the difference between the maximum and minimum values of a multi-valued parameter.
Name | Link to the description |
---|---|
Diameter | Diameters, Width & Length |
Table | Table and Table Symm |
Shape (specific to Oval) | Shape |
CrownBreadth (specific to Oval) | Crown Breadth |
CrownAngle | Facets' slopes and azimuth angles |
PavilionAngle | |
CrownPointAngle (specific to Oval) |
|
CrownWingAngle (specific to Oval) | |
PavilionWingAngle (specific to Oval) | |
StarLength | Star Length and Star Length Symm |
LowerGirdleLength | Lower Girdle Length and Lower Girdle Length Symm |
GirdleBezel | Girdle Thickness |
GirdleBezelLocal | Girdle thickness local deviations |
StarAngle |
|
UpperGirdleAngle | |
LowerGirdleAngle | |
CrownHeight | Crown Height and Crown Height Symm |
PavilionDepth (also known as PavilionHieight) | Pavilion depth |
GirdleValley | Girdle Thickness |
GirdleValleyLocal | Girdle thickness local deviations |
GirdleBone | Girdle Thickness |
GirdleBoneLocal | Girdle thickness local deviations |
2RRoundness22_5 | |
2RRoundness45 | |
2RRoundness90 | |
TableOffset | |
CuletOffset | |
TableCuletOffset | |
CuletOffsetWidthWise (specific to Oval) | |
CuletOffsetLengthWise (specific to Oval) | |
TableEdge_TEV | Table Edge |
BezelWidth | Bezel Width |
StarEdge | Star Edge and Star Edge Symm |
VertexAzimuth | Vertex Azimuth |
CrownPainting | Painting parameters |
PavilionPainting | |
TableAngle | Table Angle |
OppositeAzimuth | Opposite Azimuth |
FacetTwistMax | |
JunctionBezelTwistMax | Junction Twists |
OppositeSlopeSumHalf | Opposite Slope Sum Half |
StarFacetTwist | Twist of Facets |
JunctionBoneTwistMax | Junction Twists |
MainCrownFacetsAzimuthSymm |
|
MainPavilionFacetsAzimuthSymm | |
StarFacetsAzimuthSymm | |
TablePointsAxialSymmetry (specific to Oval) |
|
StarPointsAxialSymmetry (specific to Oval) | |
PavilionPointaAxialSymmetry (specific to Oval) |
To find out the meaning of the particular parameter, refer to this section or the HPP manual. See also the 3DCalc manual.