You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

To use DM software without regular MBox hardware, you'll need to update  MicroscopeDrivers.ini in DM distribution.

Step-by-step guide

Proving you have working DM setup with MBox hardware.

Update MicroscopeDrivers.ini for this config. Set BoardCount to 0. Comment or delete all BoardX values in the list. Also delete all "Value" entries in the list below "Board" values.

An example of this below:

 
;Microscope Full driver
Device= Engine Microscope
Table: Main
BeginData
Loglevel= Debug
Version= Union
BoardCount= 0

 

  • No labels