Stereo settings for Oxygen programs (Oxygen Immersion, HIG, etc.)

This is manual how to set settings of Oxygen and Nvidia and to run Oxygen program in stereo-mode.

Stereo settings for Oxygen programs on 3D monitor.

Under construction.

Stereo settings for Oxygen programs on 3D TV.

1. Connect PC with NVidia Quadro graphics card to 3D TV according manual How to Connect PC with NVIDIA Quadro to 3D TV
2. Install program from distributive.
3. Run Nvidia control panel - right click on desktop and select Nvidia control panel 
4. Go to Display/Change resolution and set parameters as shown below on screenshot:
   
5. Go to Stereoscopic 3D/Set up stereoscopic 3D and set parameters as shown below on screenshot:
   
6. Go to 3D settings/Manage 3D settings, select Program settings Tab, press Add button and Browse required Oxygen.exe. Then set parameters as shown below on screenshot:
   
   
   Note that Stereo – Display mode should be Generic active stereo (with NVIDIA 3D Vision) and not Generic active stereo.
   If you haven't this option in list then please make sure that you pluged 3D Vision USB IR emitter to computer:
   
   This emiiter should come with Nvidia stereo-glasses.
   
   
7. Then make shortcut for required oxygen.exe and go to properties of it. Add flag /GLStereo in end of Target field like shown below on screenshot:
   
8. Run Oxygen using this shortcut. Stereo should be available.