You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

When connecting your NVIDIA GeForce graphics card to Samsung 3D TV at the first time

Step-by-step guide

Connecting hardware

Connect your graphics card of the PC to Samsung 3D TV by HDMI cable (if it’s necessary use HDMI-to-DVI or HDMI-to-DisplayPort adapters). Please make your TV as primary display.

  

Installing software

  1. Please install latest drivers for your NVIDIA product. You can download it from here, by selecting your model of the graphics card from list: http://www.nvidia.com/Download/index.aspx?lang=en-us;

  2. Install latest version of the OctoNus Stereo Viewer.

 Settings in the NVIDIA Control Panel 

  1. Enable stereoscopic 3D. NVIDIA Control Panel > Stereoscopic 3D > Set Up Stereoscopic 3D, set Enable Stereoscopic 3D check, and press Apply button. 

     

      If after that the Setup Wizard has been started, follow the step by step instructions of the wizard.

      If you have 3DTV Play software installed on your computer, the configuration window will look like this:

        

      Otherwise it will be as follows:

      

     Note: If you want, you can buy NVIDIA 3DTV Play for $39.99 here, but it's not necessary. But usase of 3DTV Play software will provide better quality of the stereo image (higher resolution).

     

  2. Change display resolution and refresh rate. NVIDIA Control Panel > Display > Change Resolution, select the maximum supported resolution on the HD 3D list (usually 1920x1080 – Full HD) and the maximum supported refresh rate for this screen resolution (Refresh Rate list).

      

Settings in the OctoNus Stereo Viewer

  1. Run the OSV, open a stereo movie and check player settings
    1. Set frame rate to desired FPS (usually 15 or 20 fps);
    2. Set Round check for looped playback;
    3. Set "Horizontal Anamorphic" or "Vertical Anamorphic" stereo mode;
    4. Set the split type (for Digital Microscope stereo movies use Side by Side (Left First));
    5. Press 'Stereo' button.
    6. Press movie play button.
    7. Press 'full screen' button.

If you did everything correctly, you’ll see on the TV screen left and right viewpoints side-by-side like this:

 

You should set Side by Side split type on your 3D Smart TV by 3D Mode button on the remote control in accordance with selected stereo mode in OSV on step d.

  

Press 'Escape' key on your keyboard to exit from full-screen stereo mode.

  • No labels